We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 6400 1.1TB 12x96GB ECC RDIMM CL52 Supermicro H14DSG-O-CPU

SKU CH-SSCB-QA80E

1.1 TB DDR5 ECC RDIMM kit with twelve 96 GB modules at 6400 MHz CL52 for Supermicro H14DSG-O-CPU servers

  • Total capacity1.1 TB (12 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 1TB capacity with twelve 96GB modules for maximum server density
  • DDR5-6400 PC5-51200 speed rated for high-throughput workloads
  • CL52 latency at 1.10V for efficient registered operation
  • ECC and 2Rx4 registered design corrects errors under full population
  • Verified fit for Supermicro H14DSG-O-CPU with 288-pin RDIMM form factor

Exact-match upgrade for Supermicro H14DSG-O-CPU

This 1.1TB kit delivers twelve 96GB DDR5 6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. The 2Rx4 organisation and 1.10V operation let the memory controller recognise every module at full capacity and rated speed. It is intended for administrators who need maximum supported memory in this specific platform.

Replaces partial or mixed-capacity populations

When a server runs with fewer than twelve slots filled or with mismatched ranks, the controller often down-clocks or limits total addressable memory. Populating all channels with this spec-matched 12 x 96GB kit removes those compromises and restores the full 1.1TB address space. Builders who cannot fill every slot or who require UDIMM or SODIMM form factors should look elsewhere.

Sustained load behaviour with registered ECC

Registered architecture buffers each command so the memory controller stays stable even with every slot populated at 6400 MT/s. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The modules have no heat spreader, so adequate chassis airflow is required to maintain rated performance under continuous utilisation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $31,710.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1.1 TB (12 × 96 GB)
Higher than about 94% of the 20,941 comparable items (median 32 GB).
Price per GB $28.83 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K12
Total capacity1.1 TB (12 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.1 TB 12 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the memory slots on my Supermicro H14DSG-O-CPU motherboard?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the H14DSG-O-CPU requires, so each module seats directly in the board's DDR5 DIMM slots.

What is the correct installation order for the twelve 96GB modules on the Supermicro H14DSG-O-CPU?

Populate the slots in the sequence shown in the motherboard manual for 12 DIMMs per CPU; the most common mistake is skipping a required slot or mixing ranks, which prevents the system from recognising the full 1.1TB.

Do these registered ECC modules need any firmware updates or periodic replacement after deployment?

No firmware updates are required for the memory itself; the modules are designed to run continuously at 1.10V with on-die ECC correcting single-bit errors, and they carry a lifetime replacement warranty if a hardware fault ever occurs.

More in Model-Specific Memory Upgrades

Similar items