We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 6400 1.5TB 12x128GB ECC RDIMM CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-7ZAV-G95E4

A 1.5 TB DDR5 registered ECC kit of twelve 128 GB modules running at 6400 MT/s CL52 and 1.1 V, validated for the Supermicro H14DST-F motherboard

  • Total capacity1.5 TB (12 × 128 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 5 TB total capacity from twelve 128 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • 1 V registered ECC RDIMM architecture for full-slot stability
  • 2Rx4 dual-rank organisation matches controller expectations
  • 288-pin form factor validated for Supermicro H14DST-F

Exact-match server upgrade

This 1.5TB kit delivers twelve 128GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. The modules match the board's required 2Rx4 rank structure, 1.1V operating voltage and CL52 timing so the memory controller recognises full capacity at rated speed.

Registered ECC stability

Each 288-pin RDIMM uses a registered architecture that buffers address and command signals, allowing all twelve slots to run fully populated without overloading the controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads.

Twelve-module population kit

The package supplies the complete 12x128GB configuration in a single matched set, removing the risk of mixing revision codes or timing bins across separate purchases. Installers must still follow the motherboard manual for approved DIMM population order and any BIOS settings required for full-speed operation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $51,203.99
Pricier than about 96% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (12 × 128 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $34.14 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-724K12
Total capacity1.5 TB (12 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 12 × 128 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

What DDR5 speed and PC5 bandwidth does this 12-module kit run at?

The kit operates at DDR5 6400 with a PC5-51200 data rate, so every module transfers at that rated speed when the motherboard supports it.

What physical slot and form factor must the Supermicro H14DST-F provide for these 288-pin RDIMMs?

The board needs standard 288-pin DDR5 RDIMM slots; the modules are registered ECC DIMMs and will not fit UDIMM or SODIMM sockets.

In what order should the 12 DIMMs be populated on the H14DST-F to avoid a no-post condition?

Follow the motherboard manual's exact population sequence for 12 DIMMs per CPU; skipping the prescribed slot order is the most common cause of boot failure.

More in Model-Specific Memory Upgrades

Similar items