We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 6400 288GB 6x48GB ECC RDIMM CL52 1.1V 2Rx8 H13SVW-NT memory upgrade

SKU CH-6KBH-Y6PX6

288 GB server kit of six 48 GB DDR5-6400 registered ECC RDIMMs at CL52 and 1.1 V, validated for Supermicro H13SVW-NT motherboards

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 288 GB total capacity from six 48 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
  • 2Rx8 dual-rank organisation matches the Supermicro H13SVW-NT memory controller requirements
  • 288-pin RDIMM form factor ensures exact mechanical and electrical fit in the target motherboard

Server Memory Kit

This 288GB kit consists of six 48GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. Each module is a 2Rx8 Registered ECC DIMM built with major OEM chips for enterprise workloads. The Registered architecture reduces electrical load on the memory controller when all slots are populated.

Compatibility Focus

Designed for administrators upgrading a Supermicro H13SVW-NT motherboard that requires 288-pin Registered ECC DDR5 memory. The exact rank, voltage and timing match the board's memory-controller expectations. Builders using consumer boards, UDIMM slots or non-ECC platforms cannot use this kit.

Deciding Specification

The 2Rx8 Registered ECC organisation at 1.1V CL52 is the single specification that determines whether this kit will be recognised at full capacity and run at its rated 6400MHz speed on the target Supermicro platform.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,274.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $25.26 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items288 GB 6 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How can I confirm the kit is running at DDR5 6400 CL52 1.10 V after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 6400 MT/s, CAS latency shows CL52, and DRAM voltage is set to 1.10 V; the registered ECC modules should also report 288 GB total capacity across all six slots.

What exactly ships in the box and is anything else required?

The box contains six 48 GB DDR5 288-pin ECC registered RDIMM modules (288 GB total); no heat spreaders, cables, or additional parts are included, and no separate components are needed for installation on a compatible Supermicro H13SVW-NT motherboard.

Which capacity kit should I choose for the Supermicro H13SVW-NT?

This 288 GB kit (6 × 48 GB, 2Rx8, PC5-51200) is the exact-match upgrade validated for the H13SVW-NT; select it when your server requires the full six-DIMM population at the board's maximum supported density.

More in Model-Specific Memory Upgrades

Similar items