We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin edge connectors, ECC registered, 96GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 96GB (2x48GB) CL52 1.1V ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-366G-86DNZ

96 GB DDR5-6400 ECC registered dual-rank kit tuned for Supermicro H14DST-F servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB total capacity from two 48 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for maximum supported throughput
  • CL52 latency and 1.1 V operation match the motherboard's exact timing requirements
  • Registered ECC RDIMM design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin 2Rx8 form factor verified compatible with Supermicro H14DST-F memory population rules

Exact DDR5-6400 kit for Supermicro H14DST-F

This 96 GB kit consists of two 48 GB DDR5-6400 RDIMMs rated at 1.1 V with CL52 latency. The 2Rx8 registered ECC modules match the 288-pin form factor and electrical requirements the H14DST-F memory controller expects, so the system recognises the full capacity at rated speed.

For servers needing maximum registered ECC capacity

The kit suits administrators populating every slot on an H14DST-F with registered ECC memory. Builders who need unbuffered UDIMMs, SODIMMs, lower voltages, or non-ECC modules should look elsewhere, as those types will not function in this motherboard.

Ready-to-install matched pair

The two modules are packaged as a single kit with identical rank, timing and voltage characteristics, removing the guesswork of mixing separate sticks. No heat spreaders, cables, software licences or additional accessories are included.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,492.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $25.97 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

Will this 288-pin RDIMM kit work with my Supermicro H14DST-F motherboard?

This kit is verified for the Supermicro H14DST-F and matches the board's required 288-pin Registered DDR5 form factor, 1.10V voltage, and 2Rx8 rank layout so the memory controller recognises all 96GB at DDR5-6400 CL52.

Can I mix these 48GB modules with smaller DDR5 RDIMMs already installed?

Mixing different capacities or ranks can prevent the server from booting or force reduced speeds; consult the H14DST-F manual for approved population rules before adding this 2x48GB kit alongside existing DIMMs.

How do I confirm the system is running the full 96GB at 6400 MT/s with ECC active?

Enter BIOS or use a tool like dmidecode to verify each slot shows 48GB DDR5-6400 CL52 1.10V Registered ECC and that total capacity reports 96GB with ECC enabled.

More in Model-Specific Memory Upgrades

Similar items