We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with gold edge connectors and black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 6400MHz 192GB 2x96GB CL52 ECC Registered RDIMM memory upgrade

SKU CH-2ESG-0W8VT

DDR5 6400 192 GB kit of two 96 GB ECC registered RDIMMs at CL52 1.1 V for ASRock Rack TURIN2D16-2T/ROT motherboards

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 4 more
  • 192 GB kit installs at full rated speed because 6400 MT/s CL52 timings match the controller exactly
  • Registered ECC design catches single-bit errors on the fly to prevent silent data corruption
  • 2Rx4 1.10 V modules offload the memory controller so every slot runs fully populated
  • 288-pin RDIMM form factor fits the ASRock Rack TURIN2D16-2T/ROT motherboard without adapters
  • Lifetime replacement coverage with free US-based technical support protects the investment

Server Memory Kit for ASRock Rack TURIN2D16-2T/ROT

This 192GB kit delivers two 96GB DDR5 6400MHz Registered ECC RDIMMs built to the exact specifications of the ASRock Rack TURIN2D16-2T/ROT motherboard. The modules operate at 1.1V with CL52 latency and a 2Rx4 rank configuration. They provide the precise voltage, timing, and density the board's memory controller expects for full-speed operation across all populated slots.

Upgrade from Lower-Capacity or Unregistered Modules

The jump is worth it when a server hits its memory ceiling or experiences errors with consumer-grade DIMMs. Registered architecture buffers the address and command signals, allowing the memory controller to drive a fully populated array at rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that unbuffered non-ECC memory cannot stop.

Fits a 288-Pin RDIMM Slot Array

The kit requires a motherboard with DDR5 288-pin RDIMM slots and a memory controller qualified for 96GB dual-rank modules at 6400MHz. It frees the builder from mixing densities or speeds, since both DIMMs are matched in a single validated kit. Consult the system manual for approved population order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,856.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $30.51 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASRock Rack
In the box
Included items192 GB 2 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the ASRock Rack TURIN2D16-2T/ROT motherboard?

Yes, the kit is verified for that board. The 288-pin Registered DDR5 form factor matches the motherboard slots exactly.

Which slots should I populate first when installing the two 96 GB modules?

Follow the motherboard manual's DIMM population order. Installing in the wrong sequence can prevent the system from recognising the full 192 GB capacity.

Do the modules have heat spreaders that might need cleaning or replacement?

No heat spreaders are fitted on these RDIMMs, so no spreader maintenance is required. The modules rely on server chassis airflow for cooling.

More in Model-Specific Memory Upgrades

Similar items