We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 288-pin DDR5 RDIMM modules, no heat spreaders, 96GB kit

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 96GB (2x48GB) 6400MHz CL52 1.1V 2Rx8 Registered Supermicro H13SVW-NT

SKU CH-8E7N-CHWY6

96 GB dual-rank DDR5-6400 ECC RDIMM kit validated for Supermicro H13SVW-NT servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact DDR5-6400 registered ECC kit installs at rated speed
  • 96 GB dual-rank capacity fills Supermicro H13SVW-NT slots fully
  • Registered buffering offloads controller for stable full-population operation
  • On-die ECC corrects single-bit errors preventing silent data corruption
  • 10 V CL52 timings match motherboard memory-controller requirements

Exact-match upgrade for Supermicro H13SVW-NT

This 96 GB kit delivers two 48 GB DDR5 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SVW-NT memory controller expects. The 288-pin RDIMM form factor matches the board's required module type so the system recognises the full capacity at its rated speed. It is not suitable for platforms that require UDIMM or SODIMM modules.

Sustained enterprise stability

Registered architecture buffers the command and address signals so every slot remains stable when fully populated at 6400 MT/s. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during continuous workloads. The CL52 latency and 1.1 V operation are maintained under load without the timing relaxations seen in unbuffered designs.

Thermals noise and power draw

Modules operate at 1.10 V without heat spreaders, relying on server chassis airflow for cooling. The registered design reduces electrical load on the memory controller, contributing to lower overall system power draw. No active cooling components are present so acoustic output depends entirely on the host system's fan profile.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,512.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.18 per GB
Pricier than about 72% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 6400 MHz PC5-51200 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Questions about this item

How much heat and power does this 96GB DDR5 6400MHz kit draw when running continuously in a fully populated server?

Each module operates at 1.10V with CL52 timing. Registered ECC RDIMM architecture offloads the memory controller so every slot runs fully populated at rated speed without extra voltage, keeping power draw predictable during all-day workloads.

What motherboard slot and population rules must my Supermicro H13SVW-NT already have to accept this 2Rx8 288-pin registered kit?

The board needs DDR5 288-pin RDIMM slots and must support 2Rx8 registered ECC modules at 6400MHz. Consult your system manual for approved DIMM population order and maximum capacity per channel before installing the 2x48GB kit.

Can I mix these CL52 6400MHz registered ECC DIMMs with slower DDR5 modules already installed in my Supermicro server?

The kit is spec-matched to the H13SVW-NT memory controller at DDR5-6400 CL52 1.10V 2Rx8 registered ECC. Mixing different speeds, ranks or timings will force the system to down-clock all channels to the slowest module, reducing total bandwidth.

More in Model-Specific Memory Upgrades

Similar items