We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips, no heat spreaders, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM MD44800-328K2 64GB (2x32GB) DDR5 5600 CL46 memory upgrade

SKU CH-4SDB-F7DA1

Dual-channel 64 GB kit with two 32 GB DDR5 5600 CL46 unbuffered UDIMMs at 1.10 V for MSI B760M Project Zero motherboards

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeUnbuffered
  • Rated voltage1.1 V

Capacity 64GB 2X32GB

  • 64 GB capacity with two 32 GB modules for expanded multitasking
  • DDR5 5600 MT/s speed rated at PC5-44800 for high data throughput
  • Low 1.10 V operating voltage reduces power draw and heat
  • CL46 CAS latency tuned for responsive system performance
  • 288-pin UDIMM form factor designed for MSI B760M Project Zero compatibility

Target System Compatibility

This 64 GB kit is built specifically for the MSI B760M Project Zero motherboard. It suits builders and upgraders who need matched modules for that platform without guessing at compatibility. Buyers using a different board or a four-slot configuration should verify support elsewhere.

Decisive Specification

The kit runs at DDR5 5600 with a CL46 latency at 1.1 V and uses a 2Rx8 organisation across two 32 GB sticks. That speed, voltage and rank combination is what the Project Zero firmware expects; a different data rate or rank layout can prevent the system from posting.

Installation Notes

The 288-pin UDIMM modules have no heat spreader, so they sit low in the slots and clear most CPU coolers. Align the notch, press firmly until the latches click, and enable the XMP profile in BIOS to reach the rated 5600 MT/s. A common mistake is leaving the kit at the default JEDEC speed because the profile was not activated.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $880.99
Pricier than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $13.77 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineMSI Gaming Motherboard Compatible Series Memory
Model nameMSI DDR5 5600 MHz Non-ECC Unbuffered UDIMM
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsMSI
In the box
Included items64 GB (2 × 32 GB) DDR5 5600 MHz PC5-44800 2Rx8 1.1 V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 5600 speed rating mean once the modules are installed in a desktop?

The kit runs at DDR5 5600, which is PC5-44800 bandwidth, delivering that data rate when the motherboard and processor support the same JEDEC profile.

How does the 288-pin DDR5 UDIMM interface limit what the kit can do?

As a 288-pin DDR5 UDIMM, it fits standard desktop DIMM slots and operates at 1.1 V unbuffered, so maximum throughput is capped by the board's DDR5 controller and the CL46 latency.

What physical space and power do the two 32 GB sticks need to fit and run?

Each module is a standard-height 288-pin UDIMM with no heat spreader, drawing 1.10 V, so they install in adjacent DDR5 slots without extra clearance or auxiliary power.

More in Model-Specific Memory Upgrades

Similar items