We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM ME25600-618K2 32GB (2×16GB) DDR4 3200 ECC UDIMM memory upgrade

SKU CH-NS08-MKRNC

32 GB dual-channel DDR4 ECC UDIMM kit at 3200 MT/s, CL22, 1.2 V, validated for Supermicro X12STE-F and X12STD-F boards

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • 32 GB dual-channel capacity from two 16 GB modules
  • ECC corrects single-bit errors to protect data integrity
  • DDR4-3200 speed with CL22 latency at 1.20 V
  • 288-pin unbuffered UDIMM fits Supermicro X12STE-F and X12STD-F
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR4 ECC kit

This NEMIX RAM 32 GB kit contains two 16 GB DDR4-3200 UDIMMs built to the precise rank, voltage and timing your Supermicro X12STE-F or X12STD-F memory controller expects. The modules are recognised at full capacity and run at their rated speed without manual adjustment.

288-pin unbuffered ECC form factor

Each module is a 288-pin unbuffered ECC UDIMM with CL22 latency at 1.20 V, matching the board's memory-population rules. A registered DIMM or SODIMM will not fit or function in these slots, so the correct form factor is the single specification that decides compatibility.

Sustained error-correcting operation

Onboard ECC detects and corrects single-bit errors on the fly during continuous workloads, preventing silent data corruption and unplanned reboots. The low 1.20 V operation keeps power draw steady over long sessions without thermal throttling.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $287.99
Cheaper than about 55% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $9.00 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR4 ECC Unbuffered UDIMM Memory
Part numberME25600-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 ECC UDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR4 3200 MHz PC4-25600 1Rx8 1.2 V 288-PIN ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 3200 MHz rating mean once the kit is installed in a Supermicro X12STE-F?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, delivering the exact speed and timing the board's memory controller expects for full-capacity operation.

How does the 288-pin ECC UDIMM interface limit what this kit can do?

The 288-pin unbuffered ECC UDIMM form factor fits only motherboards that accept UDIMM ECC memory; it cannot be used in RDIMM or SODIMM slots, and the board must support 1Rx8 rank population rules.

What physical clearance does the 2×16 GB kit need to fit the motherboard?

Each 288-pin UDIMM is a standard-height module without a heat spreader, so it fits the regular DIMM slots on the Supermicro X12STE-F or X12STD-F without interfering with CPU coolers or chassis walls.

More in Model-Specific Memory Upgrades

Similar items