We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM MR25600-924K2 128GB 2x64GB DDR4 3200MHz CL22 ECC Registered RDIMM memory upgrade

SKU CH-TDRV-T3FEC

A 128GB DDR4 ECC registered server memory kit with two 64GB modules running at 3200MHz CL22 1.2V, validated for the Supermicro X12DPFR-AN6 motherboard

  • Total capacity128 GB (2 × 64 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • 128 GB kit installs as two 64 GB modules for full capacity
  • DDR4 3200 speed with CL22 timing runs at rated frequency
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 2 V operation matches the motherboard's voltage requirement
  • 288-pin RDIMM form factor fits the Supermicro X12DPFR-AN6 board

Exact-match server upgrade

This NEMIX RAM kit delivers 128GB of DDR4 3200MHz registered ECC memory in two 64GB modules. It is built for the Supermicro X12DPFR-AN6 motherboard and matches the board's required 2Rx4 rank, 1.2V voltage and CL22 timing so the system recognises full capacity at rated speed.

Simple DIMM installation

The 288-pin RDIMM form factor seats like any standard server DIMM; align the key notch, press firmly until the retention clips click and the module is locked. Errors usually come from mixing registered and unbuffered DIMMs or populating slots in the wrong order, which the motherboard manual specifies.

Verify motherboard rules first

Check the Supermicro X12DPFR-AN6 manual for maximum supported capacity per socket, approved population sequence and any BIOS version requirements before ordering. This kit is not for systems that only accept unbuffered UDIMMs or SODIMMs, or for boards limited to lower densities or different voltages.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $879.99
Pricier than about 59% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (2 × 64 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $6.87 per GB
Cheaper than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR4 ECC RDIMM Registered Server Memory
Part numberMR25600-924K2
Total capacity128 GB (2 × 64 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 2 × 64 GB DDR4 3200 MHz PC4-25600 2Rx4 1.2 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the 128GB kit is running at DDR4 3200MHz CL22 after installation?

Check the BIOS or UEFI memory information screen; it should report 3200MHz speed, CL22 latency, 1.20V voltage and the full 128GB capacity with ECC registered mode active.

What is included in the MR25600-924K2 package and do I need any extra parts?

The box contains two 64GB 288-pin DDR4 RDIMM modules for a total of 128GB; no cables, heat spreaders or additional components are required for installation.

Should I choose this 2x64GB 2Rx4 kit or a different capacity for my Supermicro X12DPFR-AN6?

This 128GB 2x64GB 2Rx4 registered ECC kit matches the motherboard's DDR4 3200MHz PC4-25600 specification; consult your system manual for approved population rules and maximum supported capacity before selecting an alternative.

More in Model-Specific Memory Upgrades

Similar items