We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MS38400-328K2 64GB 2x32GB DDR5 4800 CL40 SODIMM memory upgrade

SKU CH-95K8-EATBZ

A 64 GB dual-channel kit of two 32 GB DDR5 SODIMM modules running at 4800 MHz with CL40 timing and 1.1 V operation, validated for the Supermicro X13SRN-E motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules for demanding workloads
  • DDR5 4800 speed with CL40 latency for responsive system performance
  • 10 V operation reduces power draw and heat output
  • 262-pin SODIMM form factor fits Supermicro X13SRN-E motherboard
  • Built with major OEM chips from Samsung Micron Hynix for tested reliability

DDR5 4800 SODIMM kit

This 64 GB kit delivers two 32 GB DDR5 SODIMM modules rated at 4800 MT/s with CL40 timings and 1.1 V operation. It targets owners of the Supermicro X13SRN-E motherboard who need the full 64 GB capacity in a dual-channel configuration. The 262-pin unbuffered form factor matches the board's soldered slots exactly.

Upgrade from lower capacity or speed

The kit replaces factory-installed modules that may be smaller, slower, or single-rank. The jump is worth it when workloads such as virtualization, large datasets, or heavy multithreaded tasks exceed the current memory ceiling and the platform's memory controller supports the 2Rx8 organization at the rated speed.

Build integration

Installation requires two free SODIMM slots on the X13SRN-E and a BIOS that recognises the 2Rx8 density at 4800 MT/s. The modules free up no additional slots beyond the pair they occupy and add no heat spreader height, so they fit within standard laptop or 1U chassis clearances.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $617.99
Pricier than about 54% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $9.66 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS38400-328K2
Total capacity64 GB (2 × 32 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 262-pin SODIMM form factor fit the Supermicro X13SRN-E motherboard's memory slots?

Yes, the 262-pin DDR5 SODIMM modules match the Supermicro X13SRN-E motherboard's slot specification exactly.

What is the correct installation sequence for the 2Rx8 dual-rank modules on the X13SRN-E board?

Install the first 32GB module in the primary slot indicated by the system manual, then add the second module in the next approved slot for dual-channel operation.

Will the Samsung, Micron or Hynix OEM chips used in these modules require any firmware updates or replacement over time?

The major OEM chips are tested for stability at the rated 4800MHz speed and 1.1V voltage, and no firmware updates or chip replacements are needed during normal use.

More in Model-Specific Memory Upgrades

Similar items