We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM THINKMATE DDR4 3200 ECC RDIMM 96GB (12x8GB) memory upgrade

SKU CH-6EN8-5K2SW

A 96GB DDR4 3200 ECC RDIMM kit of twelve 8GB modules at CL22 and 1.2V for Thinkmate rackmount servers

  • Total capacity96 GB (12 × 8 GB)
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 96GB total capacity across 12 matched modules for dense server workloads
  • DDR4 3200 speed with CL22 latency delivers high-throughput registered performance
  • ECC registered design detects and corrects single-bit errors automatically
  • 20V operating voltage reduces power draw in 24/7 rack environments
  • Validated for Thinkmate RAX, XS, XT, XH and S3 rackmount platforms

ThinkMate DDR4 3200 ECC RDIMM kit

This 96GB kit contains twelve 8GB registered DDR4 modules rated at 3200MHz with CL22 latency and 1.20V operation. It targets administrators upgrading ThinkMate rackmount servers such as the RAX-XN24, XS4, XT10, XS8, XH8, XH10, XH12, XT24 and S3 models. Each stick is a 288-pin 1Rx8 RDIMM with on-die ECC for data integrity.

Registered DIMMs for multi-slot server boards

The registered buffer reduces electrical load on the memory controller, allowing all twelve slots to be populated without signal degradation. Modules install directly into the server's DDR4 RDIMM sockets and require a platform that supports registered ECC memory. No heat spreaders are fitted, so airflow from the chassis fans passes over the bare DRAM packages.

Low-voltage DDR4 operation

Running at 1.20V keeps power draw modest for high-density configurations. The absence of heat spreaders means thermal performance depends on the server's directed airflow design. Under typical workloads the modules operate within JEDEC thermal limits without additional cooling. Acoustic contribution is negligible compared to system fans.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $909.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (12 × 8 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $9.48 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-818K12
Total capacity96 GB (12 × 8 GB)
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items96 GB (12 × 8 GB) DDR4 3200 MHz PC4-25600 1Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the 1.20V operating voltage limit how many 8GB modules I can run continuously in a fully populated server?

The kit runs at the standard DDR4 1.20V, so power draw stays within normal registered DIMM limits for all 12 modules.

Does the lack of a heat spreader on these RDIMMs cause higher temperatures during 24/7 workloads?

Registered ECC modules without spreaders are designed for server airflow; case fans moving air across the 288-pin slots keep temperatures in spec.

Which Thinkmate rackmount models must I already own for this 96GB kit to be compatible?

The memory is validated for RAX-XN24, XS4, XT10, XS8, XH8, XH10, XH12, XT24 and S3 servers.

More in Model-Specific Memory Upgrades

Similar items