We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular network switch with three RJ45 ports and USB-C power input

NETGEAR 1 to 3 Gigabit Ethernet Splitter USB-C Power

SKU CH-HNVV-77WG4

A compact Gigabit switch splits one Ethernet line into three ports with USB-C power and LED status indicators

  • Uplink ports8
  • Layer support1
  • Control buttonsTouch
  • RequirementsStarlink, ADSL, hubs, switch, TV, set-top box, router, wirel
  • Product dimensions14.33 in W × 12.83 in H × 9.06 in D
  • Product weight0.018 kg
  • Three devices share one cable via Gigabit switch
  • Up to 1000 Mbps throughput on Cat6/7/8
  • USB-C 5 V power cable included
  • LED shows link status on each port
  • Compact 14.33in × 12.83in × 9.06in housing

Three-Port Gigabit Splitter for Wired Expansion

This NETGEAR Ethernet splitter turns one RJ45 uplink into three gigabit ports so multiple devices can share a single cable run. It is aimed at home-office users, small-business desks or Starlink installations that need extra wired connections without pulling new cable. The unit draws 5 V power from the included USB-C cable and requires no software setup.

1000 Mbps Shared Bandwidth Across Three Ports

The switch operates at Layer 1 and delivers up to 1000 Mbps total throughput split among the three downstream ports. Each connected device can negotiate up to 1000 Mbps, but simultaneous traffic shares that single gigabit pipe. Cat5e through Cat8 cables are supported and green LEDs on each output show link status.

Plug-and-Play With USB-C Power Requirement

Installation is literal plug-and-play: connect the uplink, attach up to three devices, then plug the USB-C cable into any 5 V source. The only common issue is forgetting to supply power — the splitter will not pass traffic without it. The compact 14.33in W x 12.83in H x 9.06in D housing weighs 0.018 kilograms and fits on any desk or shelf.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 94% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameNETGEAR
Connectivity
SNMP supportNo
Layer support1
Ports & slots
Uplink ports8
Size & build
Product dimensions14.33 in W × 12.83 in H × 9.06 in D
Product weight0.018 kg
Compatibility
RequirementsStarlink, ADSL, hubs, switch, TV, set-top box, router, wireless bridge, computer
More details
Control buttonsTouch

Questions about this item

How much bandwidth does each connected device actually get when three are running at once?

The 1000 Mbps uplink is shared, so three active devices split that throughput; a single device can use the full 1000 Mbps when the others are idle.

What port type and cable categories does the splitter use for its connections?

It uses standard RJ45 ports and works with Cat5, Cat5e, Cat6, Cat7 or Cat8 cables for gigabit speeds.

What are the physical dimensions and how is the unit powered?

The enclosure measures 14.33in wide by 12.83in high by 9.06in deep and draws 5 V power through a USB-C cable included in the box.

More in Ethernet & PoE Switches

Similar items