TP-Link LS1005G 5-port Gigabit network switch
- Desktop
- Desktop
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A six-port web-managed switch with four 2.5G Ethernet ports and two 10G SFP+ uplinks in a fanless metal chassis
The NETGEAR ProSafe GT-ST024M provides four 2.5G RJ45 ports and two 10G SFP+ slots for small business or home lab networks. It suits users who need multi-gigabit uplinks and basic Layer 2 management without a command-line interface. Buyers requiring Power over Ethernet for access points or cameras should look elsewhere as the switch only lists Passive PoE as a standard.
A fanless metal enclosure dissipates heat silently, with idle power draw around 1.3W and typical load near 12W. The RTL8372N master chip is specified for lower power consumption and reduced heat output. Operating temperature range is 0 to 40°C and the unit may feel warm when both 10G SFP+ ports run at full throughput.
Management is performed through a simplified web GUI at 192.168.2.1 with default admin credentials, supporting VLAN, QoS, Link Aggregation and Spanning Tree. Configuration changes require a two-step apply-and-save process and there is no physical reset button. The desktop form factor measures 14.33in wide, 12.83in high and 9.06in deep with six total ports facing the front.
Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | NETGEAR |
| Product line | ProSafe |
| Part number | GT-ST024M |
| Performance | |
| Forwarding rate | 2,500 MB/s |
| Connectivity | |
| Supported standards | Passive PoE |
| Network cabling | RJ45 Ethernet Port and SFP+ Port |
| Uplink connection | 10/100 Mbit/s |
| Main port speed | 10/100 Mbit/s + 1,000 Mbit/s |
| Management access | RJ45 Ethernet Port and SFP+ Port |
| Jumbo frame support | 9216 bytes |
| SNMP support | No |
| Ports & slots | |
| Uplink ports | RJ45 |
| Main ports | 6 |
| Main port type | RJ45 Ethernet Port and SFP+ Port |
| Size & build | |
| Product dimensions | 14.33 in W × 12.83 in H × 9.06 in D |
Connect the four 2.5G RJ45 ports and two 10G SFP+ slots, then set your PC to a static IP in the 192.168.2.x range before browsing to 192.168.2.1; the step most people miss is clicking Apply in the IP settings and then clicking Save Configuration a second time so changes survive a reboot.
The fanless metal chassis has no moving parts to replace; only the SFP+ modules in the two 10G slots may need swapping if you change fibre type or distance, and the 12 W power adapter can be replaced with an equivalent unit if it ever fails.
The RTL8372N chip and 12 W power budget cap total throughput at 2500 MB/s, so sustained wire-speed traffic on all four 2.5G ports plus both 10G SFP+ links will hit that forwarding ceiling before the 0–40 °C operating range becomes a constraint.
More in Ethernet & PoE Switches
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?