We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow step-up converter cable with DC connectors, 3.2 feet long, IP68 rated

Netgear QL-DC-DC30V3.5A 9V-28V to 30V 3.5A Step-Up Power Adapter Cord

SKU CH-F31N-2H876

A 9 V to 28 V input step-up cable delivers a steady 30 V at 3.5 A for Starlink Mini, with IP68 protection and 100 W maximum output

  • Connector count3
  • Connector genderMale to Female
  • Conductor gauge2 AWG
  • Product typeSpeaker Wires
  • Product colorYellow
  • Overall length3 ft (0.91 m)
  • Converts 9 V–28 V input to a steady 30 V 3.5 A output for Starlink Mini
  • IP68 waterproof rating protects against dust, water and harsh outdoor conditions
  • 2 ft DC cord plus 1.6 ft silicone wire gives flexible, portable placement
  • Built-in safety protections guard against voltage fluctuations for uninterrupted service
  • Plug-and-play design requires no configuration — just connect and power up

Starlink Mini power conversion

This Netgear step-up adapter cord converts a 9V to 28V DC source into a stable 30V 3.5A output for the Starlink Mini router. It is built for users who need to run the terminal from 12V or 24V vehicle, RV or portable battery systems. The IP68-rated assembly resists dust, water, UV and corrosion in outdoor environments. A 3.2-foot DC cord and 1.6-foot silicone lead give flexible placement.

Replaces fixed-voltage supplies

The cable removes the need for a mains-only power brick when a 12V or 24V DC source is already available. It is worth the switch when the installation cannot reach AC power but can tap a vehicle or battery bank. The converter maintains a steady 30V output despite input fluctuations across the 9V to 28V range. Buyers who only have access to standard wall outlets will not need this adapter.

Sustained 100W delivery

The unit is rated for a maximum continuous output of 100W, so the 30V 3.5A load can be maintained without thermal throttling. Multiple protection circuits guard against over-voltage, over-current and short-circuit conditions during long runs. The ruggedised, waterproof housing keeps performance consistent in snow, wind and direct sunlight. No active cooling is used, so silent operation is preserved.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $51.99
Pricier than about 90% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNetgear
Model nameQL-DC-DC30V3.5A
Product typeSpeaker Wires
Product colorYellow
Ports & slots
Connector count3
Connector genderMale to Female
Size & build
Overall length3 ft (0.91 m)
Conductor gauge2 AWG

Questions about this item

What input voltage range does the 9V-28V to 30V step-up adapter accept?

The adapter accepts a 9V to 28V DC input range, suitable for 12V and 24V vehicle or battery systems.

How do I connect the 3.2 ft DC cord and 1.6 ft silicone wire to the Starlink Mini?

Plug the male DC connector into your 12V or 24V source, then connect the female end to the Starlink Mini power port; no configuration is required.

When should I replace the IP68 waterproof converter if used outdoors continuously?

Replace the unit if the yellow cable jacket shows cracking, the connectors corrode, or the 30V 3.5A output becomes unstable under load.

More in Jumper & Adapter Power Cords

Similar items