Netscout HH Tools HW-SW-Support
Netscout HH Tools HW-SW-Support AC Adapter 15 V 2 A
A 15 V DC, 2 A AC adapter compatible with NetScout AirCheck G2 wireless test equipment, accepting 120 V or 230 V AC input
- Powers NetScout AirCheck G2 test gear reliably
- 15 V DC output matches original equipment spec
- 2 A current rating supports full device operation
- Accepts 120 V and 230 V AC input worldwide
- Genuine NetScout replacement charger ensures compatibility
Replacement power for NetScout test gear
This AC adapter replaces the original charger for NetScout AirCheck G2 wireless test equipment. It delivers 15 V DC at up to 2 A from a standard mains supply. The unit accepts both 120 V AC and 230 V AC input for worldwide use. Technicians who need a direct replacement for lost or damaged power supplies will find it suitable.
Thermals noise and power draw
The adapter operates from conventional wall power without active cooling. No fan or audible components are present, so it runs silently in typical office or field environments. Power consumption scales with the connected tester, drawing only what the device requires up to the rated output. Heat output remains low during normal charging and operation cycles.
Behaviour under sustained load
When the test instrument runs continuously, the adapter maintains its 15 V output within the specified 2 A limit. Extended sessions do not introduce additional noise or thermal concerns beyond the passive design. The supply is intended for steady operation rather than short bursts, matching the duty cycle of the supported AirCheck G2 equipment.
How it compares
Measured against everything we stock in Laptop Chargers & Batteries, at today’s prices. Recalculated every night.
- Price $57.99
- Pricier than about 88% of the 27,790 comparable items (median $30.99).
Specifications
| Product | |
|---|---|
| Brand name | NETSCOUT HH TOOLS HW-SW-SUPPORT |
| Size & build | |
| Shipping weight | 0.32 kg |
| Package size | 152 × 76 × 70 mm |
Questions about this item
How do I connect the AC adapter to the NetScout AirCheck G2, and what voltage setting should I check first?
Plug the adapter into a 120 V AC or 230 V AC mains supply, then connect the DC output to the AirCheck G2; the unit auto-ranges so no manual voltage selection is needed.
What part will need replacement first if I use this charger daily with my test equipment?
The AC cable or DC connector typically wears before the internal supply; keep the strain reliefs straight and replace the cable if the jacket cracks or pins loosen.
What thermal limit appears first when the adapter runs at 2 A output for long test sessions?
The enclosure reaches its maximum safe surface temperature before the 15 V DC output begins to fold back, so keep ventilation clear during sustained loads.
More in Laptop Chargers & Batteries
Similar items
Dr. Battery Dell XPS 14 L421X laptop battery 4662 mAh 14.8V
- Li-polymer
- Battery
Damaite 63Wh 4-Cell Laptop Battery for Dell Latitude 5320 7320 7420 7520
- 4 Cell Lithium-Ion
- Black
Lenovo 0B46994 90W 20V AC adapter for ThinkPad X1 Carbon
- Black
- AC Adapter





