Nibco, Inc. 6002 2" x 1-1/4" FTG x C Copper Reducer
Connects 2 in. and 1-1/4 in. copper tube with a wrought copper FTG x C fitting rated to 364 psi at 100 °F
- Product typeDrain Components
- Main materialHAWA
- Copper construction resists corrosion for long service life
- FTG x C connection simplifies installation in copper piping systems
- Reduces 2 in to 1-1/4 in tube size for flow adaptation
- Rated 364 psi at 100°F for reliable pressure handling
- Operates from -20°F to 400°F across wide temperature range
Copper Reducer for Drain Systems
The Nibco 6002 is a wrot copper reducer designed for drain components. It connects a 2 inch fitting end to a 1 1/4 inch copper tube end using an FTG x C joint. The part is new and meets ASME/ANSI B 16.22 standards for plumbing installations.
Pressure and Temperature Headroom
The reducer withstands a maximum pressure of 364 psi at 100 degrees F. Its operating temperature range spans from -20 degrees to 400 degrees F. Within these limits the joint maintains integrity; beyond them the fitting may deform or leak and should not be used.
ASME/ANSI B 16.22 Interface Limits
The connection follows the ASME/ANSI B 16.22 standard for wrought copper solder-joint pressure fittings. This standard defines the dimensions and tolerances for the FTG x C joint. Installations that require different pressure classes, thread types or tube materials fall outside the scope of this reducer.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 82% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Nibco |
| Model name | 6002 2 × 11/4 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
Will the 2 in x 1 1/4 in wrot copper reducer join cleanly to older copper pipe of the same nominal sizes?
The fitting uses FTG x C connections with outside diameters of 2-1/8 in and 1-3/8 in, matching standard copper tube dimensions for sweat soldering to existing pipe of those nominal sizes.
How can I verify the joint is sound after soldering the FTG x C reducer?
Pressurise the system up to the rated 364 psi at 100 Degrees F and inspect each soldered joint for leaks; the ASME/ANSI B 16.22 marking confirms the fitting meets the pressure standard.
Does the box contain flux, solder or any installation accessories for the copper reducer?
Only the wrot copper reducer itself is supplied; flux, solder and any required cleaning tools must be purchased separately.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc.
Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze
- Drain Components
- HAWA
$10.99
0.00013325BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016962BTC
In stock