Nippon Labs 20HDMI-35FTMM-26WC hdmi cable 35ft 26AWG 18Gbps HDMI 2.0

35-foot CL3 HDMI 2.0 cable

This 35 ft high-speed HDMI 2.0 cable carries 18 Gbps bandwidth and supports 4K at 60 Hz, HDR, 3D and ARC. Its CL3 fire-resistant jacket is rated for in-wall installation, making it suitable for permanent runs through studs or conduit. Gold-plated male connectors on both ends ensure reliable contact with TVs, projectors, consoles and streaming devices.

Replaces shorter or non-rated cables

Builders pulling cable through walls need the CL3 rating to meet building codes; a standard jacket cannot be used in that scenario. The 35 ft length spans rooms where 6 ft or 10 ft cables fall short, and the 26 AWG stranded copper conductors maintain signal integrity over that distance. It is not for runs exceeding the certified length or for installations that demand a higher fire rating than CL3 provides.

Sustained 18 Gbps throughput

Triple shielding and 100 % pure copper conductors keep the 18 Gbps link stable during long viewing sessions, preventing the dropouts that thinner or unshielded cables exhibit after warming up. The 48-bit deep colour and 240 Hz refresh-rate headroom stay consistent across the full 35 ft, so 4K HDR content plays without sparkles or audio loss. The fire-resistant PVC jacket resists degradation inside walls, preserving performance for the life of the installation.