We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft DisplayPort male-to-male cable with latching connectors

Nippon Labs

Nippon Labs DP-3-MM 3 ft DisplayPort cable

SKU CH-GMPS-D7KEZ MPN DP-3-MM

A 3 ft male-to-male DisplayPort cable compliant with version 1.2, supporting 3840 x 2160 at 60 Hz and 21.6 Gbps bandwidth

  • Cable length3 ft (0.91 m)
  • Connector count2
  • Connector detailsDisplayPort to DisplayPort
  • Connector genderMale to Male
  • Product typeDisplayPort Cable
  • Product colorBlack

Cable Length 3 Feet

  • DisplayPort 1.2 compliant for reliable 4K@60Hz video
  • 6 Gbps bandwidth supports 3840×2160 at 60 Hz
  • Latching connectors with molded strain relief ensure secure fit
  • Gold-plated contacts on bare copper conductors resist corrosion
  • Foil and braid shielding protects signal integrity

DisplayPort 1.2 cable for 4K 60 Hz

This 3 ft cable carries a DisplayPort 1.2 signal between two male connectors. It supports HBR bandwidth up to 21.6 Gbps and resolutions up to 3840 x 2160 at 60 Hz. Gold-plated terminals, bare copper conductors and foil-plus-braid shielding preserve signal integrity. The latching plugs and molded strain relief keep the link secure.

Users who need longer reach or higher refresh rates

The fixed 3 ft length suits desktop-to-monitor runs on the same desk. Installers who must cross a room or route through conduit should choose a longer cable. Builders targeting 4K above 60 Hz or 8K resolutions need a DisplayPort 1.4 or newer link. The cable also cannot convert to HDMI, DVI or VGA without an active adapter.

HBR bandwidth rating of 21.6 Gbps

This single figure guarantees 4K 60 Hz video with full colour depth and audio pass-through. If the source or display requires more bandwidth for higher refresh rates, deeper colour or DSC-free 8K, this cable will not meet the spec. Verify the required bandwidth before purchasing.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 90% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model nameDP-3-MM
Product typeDisplayPort Cable
Product colorBlack
Ports & slots
Connector count2
Connector detailsDisplayPort to DisplayPort
Connector genderMale to Male
Size & build
Overall length3 ft (0.91 m)
Cable length3 ft (0.91 m)
Shipping weight0.09 kg
Package size216 × 147 × 8 mm

Other versions of this model

2 more in the same range

Questions about this item

Does the 21.6 Gbps bandwidth limit 4K output to 60 Hz?

Yes, the cable is rated for 21.6 Gbps and supports 3840 x 2160 at 60 Hz per the DP 1.2 specification.

Does the cable generate heat or draw noticeable power during all-day use?

No, it is a passive copper cable with no active electronics, so it produces no heat and draws no power of its own.

Must both devices have full-size DisplayPort ports for this male-to-male cable to work?

Yes, each end has a standard male DisplayPort connector, so the source and display both need a matching full-size DisplayPort input.

More in DisplayPort Monitor Cables

Similar items