No Sew 10-Port Gigabit PoE Switch 8×PoE+ 2×Uplink 120W VLAN Extend Fanless Metal

10-Port Gigabit PoE Switch for Surveillance

This 10-port unmanaged switch provides eight 10/100/1000 Mbps PoE ports and two dedicated gigabit uplink ports. It delivers active IEEE 802.3af/at power up to 30W per port with a total budget of 120W. The fanless metal housing enables silent operation on a desktop or wall mount. It is built for IP cameras and access points in home office or surveillance networks.

Check PoE Standards and Cable Runs Before Ordering

Verify that your powered devices support standard 48V IEEE 802.3af or 802.3at PoE; passive PoE equipment is not compatible. Non-PoE devices will receive data only when connected. Ensure the total power draw of all connected devices stays within the 120W shared budget. For runs beyond standard Ethernet limits, confirm your cameras support the extend mode distance of 250 m.

Silent Fanless Operation Under Continuous Load

The fanless metal enclosure dissipates heat passively while the switch powers multiple cameras around the clock. Built-in 4 kV lightning protection and port short-circuit recovery help maintain uptime during sustained network traffic. VLAN isolation mode reduces broadcast storms by separating downlink ports while keeping uplink communication open. PoE watchdog can automatically reboot unresponsive powered devices for stable long-term operation.