We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal box with five RJ45 ports and power socket

No Sew

No Sew TEG1005DV4.0 5 Port Gigabit Network Switch

SKU CH-36HQ-G2VNY

Five gigabit RJ45 ports expand wired connections for PCs, NAS and cameras with plug-and-play setup, 9K jumbo frames, fanless metal housing and 6kV surge protection

  • Supported standardsPassive PoE
  • Network cablingRJ45
  • Management typeUnmanaged
  • Uplink portsRJ45
  • Uplink connection10/100 Mbit/s
  • Uplink connectionRJ45
  • Five 10/100/1000Mbps RJ45 ports for wired expansion
  • Unmanaged plug-and-play setup needs no software or configuration
  • 9K jumbo frame support improves large-file transfer efficiency
  • Fanless metal housing runs silently and dissipates heat
  • 6kV surge protection on all ports with desktop or wall-mount flexibility

5-Port Gigabit Desktop Switch

The No Sew TEG1005DV4.0 is an unmanaged 5-port Gigabit Ethernet switch built for homes, offices and small businesses that need extra wired connections. Five 10/100/1000Mbps RJ45 ports with auto MDI/MDIX connect PCs, NAS, NVRs, IP cameras and access points without any configuration. A 5V .6A power adapter is included for immediate plug-and-play operation.

Upgrade from 100Mbps Switches

Replacing a legacy 10/100 switch with this model jumps every port to 1000Mbps, so large file copies, high-bitrate streams and multi-device backups finish faster. The step up is worth it when your router already delivers Gigabit WAN and you want the LAN to keep pace without managing VLANs or QoS. Existing Cat5e or Cat6 patch cables work unchanged thanks to auto-negotiation.

Limits of Unmanaged Gigabit Ethernet

The switch forwards at Layer 1 with 9216-byte jumbo frames and IEEE 802.3x flow control, but it cannot prioritise traffic, segment networks or run SNMP monitoring. Sixteen kilovolt surge protection on each port helps survive spikes, yet the metal case relies on passive cooling, so sustained heavy loads in a sealed cabinet may throttle. Uplink speed is fixed at the negotiated port rate — no dedicated SFP or 10G uplink exists.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 97% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameNETGEAR
Product lineProSafe
Part numberTEG1005DV4.0
Performance
Forwarding rate1 Gbit/s
Connectivity
Supported standardsPassive PoE
Network cablingRJ45
Management typeUnmanaged
Uplink connection10/100 Mbit/s
Main port speed10/100 Mbit/s + 1,000 Mbit/s
Management accessRJ45
Jumbo frame support9216 bytes
SNMP supportNo
Layer support1
Ports & slots
Uplink portsRJ45
Main ports5
Main port typeRJ45
Size & build
Product weight170 g
In the box
In the boxSwitch

Questions about this item

What size screws or anchors are needed for the wall-mount slots on this metal case?

The switch includes a wall-mount design; use standard wood or drywall anchors with screws that fit the keyhole slots on the rear of the metal housing.

Which end of the supplied 5V 0.6A adapter plugs into the switch, and does the barrel jack click when seated?

Insert the barrel connector into the DC power port on the rear until it seats firmly; the LED indicators will light once power is applied.

If a port stops linking after a lightning strike, can that single port be repaired or must the whole unit be replaced?

The 6kV surge protection on all five RJ45 ports helps guard against spikes; if a port fails the entire unmanaged switch is replaced.

More in Ethernet & PoE Switches

Similar items