Nomaco Kflex 6RHFN068238 trap
Halogen-free elastomeric pipe insulation tube, 6 ft length, R-value 4.2, plenum rated with flame spread 25 and smoke developed 50, operating from -40 to 250 °F
- Product typeDrain Components
- Main materialHAWA
- Product colorGreen
- Operates reliably from -40 °F to 250 °F
- Closed-cell Buna-N rubber resists moisture ingress
- Plenum rated with flame spread 25 and smoke developed 50
- R-value 4.2 delivers strong thermal resistance
- Halogen-free elastomeric material in green colour
Pipe insulation tube for 2 inch pipes
This Nomaco Kflex tube provides thermal protection for pipes with a 2 3/8 inch outside diameter. The 3/4 inch wall thickness creates an R-value of 4.2 for effective temperature control. Made from halogen-free Buna-N rubber, it operates reliably between -40 and 250 degrees Fahrenheit. The unslit tube design suits new installations where the pipe end is accessible.
Suits plenum spaces and high-temperature lines
The plenum rating and low flame spread index of 25 with smoke developed index of 50 meet commercial building requirements. The closed-cell foam structure resists moisture absorption on chilled water or refrigeration lines. Installers needing a pre-slit product for retrofit work on existing piping should look at alternative designs. The fixed 6-foot length also requires cutting for shorter runs.
2 3/8 inch inside diameter matches 2 inch pipe size
This specific dimension ensures proper fit on standard 2 inch nominal pipe with 2 3/8 inch outside diameter. The unslit installation style means the tube must slide over the pipe end during assembly. Verifying the pipe outside diameter against this 2 3/8 inch figure is the single check that confirms compatibility.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 60% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Nomaco Kflex |
| Model name | 6RHFN068238 |
| Product type | Drain Components |
| Product color | Green |
| Size & build | |
| Main material | HAWA |
Questions about this item
How do I install the 6 ft unslit insulation tube on a 2 in pipe, and what step is often missed?
Slide the unslit tube over the pipe before making final connections, then seal the seam with compatible adhesive tape; skipping the tape leaves gaps that reduce the R 4.2 value.
What maintenance or replacement will the HAWA Buna-N rubber insulation need over time?
Inspect annually for tears, UV damage or compression; replace any section where the 3/4 in wall thickness has flattened or the green jacket is cracked.
At what temperature limit does the insulation first degrade during sustained use?
Continuous exposure above 250 Degrees F exceeds the maximum operating temperature and will cause the closed-cell foam to break down.
More in Drain Stoppers, Strainers & Traps
Similar items
Dynaquip Controls VLE2.NK 1/4 Manual 2-Way Ball Valve trap
- Drain Components
- HAWA
HAYWARD POOL PRODUCTS INC BFAS1015CES 1-1/2" Bulkhead Fitting Trap
- Drain Components
- HAWA
Dynaquip Controls VLE2.NK 3/8" Drain Trap
- Drain Components
- HAWA





