Nomaco Kflex 6RX100158 Drain Trap 1-1/4" 6 ft 1" Wall
NBR/PVC elastomeric pipe insulation fits 1-1/4 inch pipe with a 1 inch wall thickness and a 6.6 R-value
- Product typeDrain Components
- Main materialHAWA
- Product colorBlack
- Withstands extreme cold down to -297 °F thanks to NBR/PVC elastomeric material
- Handles high heat up to 220 °F for reliable performance in hot systems
- Delivers strong thermal resistance with an R-value of 6.6 for energy efficiency
- Fits 1-1/4 inch pipes precisely with 1 inch wall thickness for secure coverage
- Ready for immediate installation as a new, unslit 6-foot length in black
Pipe insulation for 1-1/4" pipe
This black elastomeric pipe insulation fits 1-1/4 inch pipe and 1-5/8 inch tube with a 1 inch wall thickness. The six-foot length covers residential and commercial plumbing runs. The NBR/PVC based material suits hot and cold water lines in new installations or retrofit projects.
Operating range and thermal rating
The insulation performs from minus 297 degrees F to 220 degrees F and carries an approximate R-value of 6.6. This wide temperature span supports chilled water, refrigeration and hot water systems without additional jacketing in normal indoor use.
Unslit construction and daily handling
The unslit body requires cutting to length and sealing at joints during installation. The flexible elastomeric material bends around fittings without kinking and the black finish resists UV exposure on exposed runs. California Proposition 65 applies to this product.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $34.99
- Typical for this category: the median of 4,240 items is $31.99.
Specifications
| Product | |
|---|---|
| Brand name | Nomaco Kflex |
| Model name | 6RX100158 |
| Product type | Drain Components |
| Product color | Black |
| Size & build | |
| Main material | HAWA |
Questions about this item
How do I install the 1 in wall thickness insulation on a 1-1/4 in pipe and what step is often missed?
Slide the unslit tube over the pipe before final connections, then seal the seam with compatible adhesive tape; skipping the tape leaves a thermal bridge.
What maintenance or replacement will the NBR/PVC elastomeric insulation need over time?
Inspect annually for UV cracking or compression set; replace sections that have lost thickness or show surface degradation to maintain the R 6.6 value.
At what temperature limit does the insulation reach its maximum rated performance during sustained use?
Continuous exposure at 220 °F is the upper service limit; beyond this the material can degrade and lose insulating effectiveness.
More in Drain Stoppers, Strainers & Traps
Similar items
Cherne 270040 Test Ball Plug 6.5 in Deflated Length
- Drain Components
- HAWA
Legris 3182 60 00 Push-Fit Elbow Trap 3/8 in
- Drain Components
- Plastic
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Viega 79045 1" Press Bronze Spring Check Valve .5 psi 200°F
- Drain Components
- HAWA





