We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB network card with dual QSFP112 ports and silver bracket

NVIDIA

NVIDIA ConnectX-7 MCX753436MS-HEAB 200GbE dual-port QSFP112 network card

SKU CH-D8MZ-5MNZZ MPN MCX753436MS-HEAB

A dual-port QSFP112 network adapter delivering 200 Gb/s Ethernet and NDR200 InfiniBand over optical fibre via a PCIe 5.0 x16 interface

  • Rated speedData Rate InfiniBand: NDR200/HDR/HDR100/EDR/FDR/SDR Ethernet
  • Interface typePCI Express Gen 5.0/4.0: SERDES @ 16/32GT/s, x16 lanes (4.0
  • Temperature rangeOperational: 0 degree Celsius to 55 degrees Celsius Non-oper
  • Humidity rangeOperational: 10% to 85% relative humidity Non-operational: 1
  • Seller noticeREGULATORY Safety: CB / cTUVus / CE EMC: CE / FCC / VCCI / I
  • Key featuresVoltage: 12V_EDGE Typical power with passive cables in PCIe

Part MCX753436MS-HEAB

Data Rate 200GbE/NDR200

Network Interface QSFP112 / Dual Ports

  • 200 Gb/s Ethernet throughput with dual QSFP112 ports
  • PCIe 5.0 x16 host interface at 32 GT/s SERDES
  • 5 W typical power with passive cables in Gen 5.0
  • SFF adapter card 115 mm x 76 mm fits dense servers
  • Operating temperature range 0 °C to 55 °C

200GbE dual-port QSFP112 adapter

The NVIDIA ConnectX-7 MCX753436MS-HEAB is a dual-port network card built for 200GbE and NDR200 InfiniBand links. It targets servers and workstations that need high-bandwidth connectivity over optical fibre. The card uses a PCI Express 5.0 x16 host interface and fits an OCP 3.0 small form factor bracket.

PCIe 5.0 x16 slot and optical cabling

Installation requires a PCI Express 5.0 x16 slot, which also accepts Gen 4.0 and 3.0 links at reduced lane speeds. Dual QSFP112 cages accept optical transceivers for long-distance runs between servers and network gear. Typical draw is 24.5W from the 12V edge connector when passive cables are used, leaving headroom in dense chassis.

High-density clusters and HPC fabrics

This adapter suits builders deploying 200GbE or NDR200 InfiniBand fabrics in compute clusters, storage nodes or AI training rigs. It is not for desktops lacking a full-length x16 slot or QSFP112 optics budget. Buyers needing single-port 100GbE or copper DAC connectivity should evaluate other form factors.

How it compares

Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.

Price $1,289.99
Pricier than about 91% of the 1,505 comparable items (median $90.99).

Specifications

Product
Brand nameNVIDIA
Model nameConnectX-7
Part numberMCX753436MS-HEAB
Performance
Rated speedData Rate
InfiniBand: NDR200/HDR/HDR100/EDR/FDR/SDR
Ethernet: 200/100/50/25/10 Gb/s
Ports & slots
Interface typePCI Express Gen 5.0/4.0: SERDES @ 16/32GT/s, x16 lanes (4.0 and 3.0 compatible)
Networking Port: Dual-Port QSFP112 InfiniBand and Ethernet
Size & build
Product dimensionsAdapter Card Size: Small Form Factor (SFF) , 4.52 in × 2.99 in (115 mm × 76 mm)
Adapter Card Height: 0.59 in (15.1 mm)
Shipping weight9.07 kg
Package size25 × 25 × 25 mm
Environment & compliance
Temperature rangeOperational: 0 degree Celsius to 55 degrees Celsius
Non-operational: -40 degrees Celsius to 70 degrees Celsius
Humidity rangeOperational: 10% to 85% relative humidity
Non-operational: 10% to 90% relative humidity

Other versions of this model

5 more in the same range

Questions about this item

At what temperature does the ConnectX-7 MCX753436MS-HEAB throttle under sustained load?

The operational range is 0 to 55 degrees Celsius; sustained operation near the upper limit will trigger thermal protection.

How much power and heat does the MCX753436MS-HEAB produce when running 200 GbE all day?

Typical power is 24.5 W with passive cables in PCIe Gen 5.0 x16; the card relies on server airflow for cooling.

Which host interface and bracket must the server provide for this OCP 3.0 SFF adapter?

It requires a PCI Express 5.0 x16 slot (also compatible with Gen 4.0 and 3.0) and an OCP 3.0 bracket opening.

More in Ethernet Cards & NICs

Similar items