We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fiber cable with one MPO12 APC connector splitting to two MPO12 APC connectors, 30m length

NVIDIA

NVIDIA Passive Fiber Cable SMF MPO12 APC to 2xMPO12 APC 30m

SKU CH-H5TS-HMKRE

A 30-metre single-mode passive fibre cable splitting one MPO12 APC connector into two

  • Single-mode fiber carries data over 30 m
  • MPO12 APC connectors ensure low-loss alignment
  • Y-split design fans out to two endpoints
  • Passive construction needs no external power

30-metre SMF MPO12 APC fibre cable

This passive NVIDIA cable uses single-mode fibre with angled-polish MPO12 connectors. One end terminates in a single MPO12 APC plug, the other splits into two MPO12 APC plugs. The assembly is rated for a 30-metre run.

Installers linking one trunk to two distribution

The Y-split design suits patch-panel architectures where a single backbone feeds two separate cassettes. Buyers needing a straight point-to-point link or multi-mode fibre should select a different cable. Those requiring active signal conditioning or longer reach than 30 metres must look elsewhere.

How it compares

Measured against everything we stock in Fiber Optic Patch Cables, at today’s prices. Recalculated every night.

Price $118.99
Pricier than about 82% of the 812 comparable items (median $29.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNVIDIA

Questions about this item

How do I route the 30m single-mode fiber with MPO12 APC connectors through a cable tray without damaging the ferrules?

Pull the cable by the strength member, not the connector housing; keep bend radius above the manufacturer minimum and use protective caps on both MPO12 APC ends until seated.

When should I replace the 30m passive fiber cable if insertion loss rises on the MPO12 APC links?

Clean the MPO12 APC end faces first; if loss remains above the link budget after proper cleaning and re-inspection, replace the 30m cable.

More in Fiber Optic Patch Cables

Similar items