We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mid-tower case with dark tinted tempered glass side panel and mesh front, three 120mm fans visible inside

NZXT

NZXT H7 Flow CM-H72FB-01 PC Case

SKU CH-FF7T-N897X MPN CM-H72FB-01

Mid-tower ATX case with vertical PSU layout, three pre-installed 120 mm front fans and bottom mounts for three more 120 mm fans

  • Max graphics card length410 mm
  • Supported motherboard sizesE-ATX (Up to 27.7 mm), ATX, Micro-ATX, Mini-ITX
  • Housing materialSGCC Steel, Dark Tinted Tempered Glass
  • Side panel type1 x Side Tempered Glass Panel
  • Dust filteringHigh Performance Mesh
  • Front panel ports2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x Audi

Model H7 Flow Black (2024)

  • Supports E-ATX boards up to 27.7 mm wide
  • Three 120 mm front fans pre-installed for immediate airflow
  • Front radiator capacity up to 420 mm for liquid cooling
  • GPU clearance of 410 mm fits long graphics cards
  • USB 3.2 Gen 2 Type-C front port for fast peripherals

Mid-tower airflow case

The NZXT H7 Flow is an ATX mid-tower built around a high-performance mesh front panel and three pre-installed 120 mm F120Q fans. It accepts E-ATX boards up to 27.7 mm thick plus ATX, Micro-ATX and Mini-ITX layouts. A vertical PSU layout creates room for three bottom intake fans without widening the 244 mm chassis. Front USB 3.2 Gen 1 Type-A, USB 3.2 Gen 2 Type-C and a headset jack handle everyday I/O.

Thermals and acoustics at idle

The mesh front and top panels feed cool air to components while trapping dust on removable filters. Three front 120 mm fans spin at 1 350 ± 150 RPM, delivering 60.2 CFM each at low noise levels. A single rear 120 mm or 140 mm slot and top mounts for three 120 mm or two 140 mm fans give flexible exhaust paths. The dark-tinted tempered glass side panel keeps the interior visible without adding vibration.

Sustained-load behaviour

Under prolonged load the case can mount a 420 mm radiator up front and a 360 mm unit on top for liquid-cooled CPUs and GPUs. GPU clearance reaches 410 mm and CPU cooler height tops out at 185 mm, leaving headroom for large air towers. The PSU cavity fits units up to 200 mm deep while still allowing bottom fan airflow. Seven expansion slots and four 2.5-inch plus four 3.5-inch drive bays support dense storage arrays without choking airflow.

How it compares

Measured against everything we stock in Tower & Desktop PC Cases, at today’s prices. Recalculated every night.

Price $99.99
Typical for this category: the median of 1,468 items is $100.99.
Max graphics card length 410 mm
Higher than about 60% of the 894 comparable items (median 400 mm).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNZXT
Model nameCM-H72FB-01
Part numberCM-H72FB-01
Product colorBlack
Product typeATX Mid Tower
Storage
3.5-inch internal bays2 + 2
2.5-inch internal bays4
Ports & slots
Front panel ports2 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x Audio,
Expansion card slots7
Size & build
Max graphics card length410 mm
Housing materialSGCC Steel, Dark Tinted Tempered Glass
Side panel type1 x Side Tempered Glass Panel
Dust filteringHigh Performance Mesh
Fan mounting optionsFront: 3 × 120 mm / 3 × 140 mm (3 x F120Q included)
Top: 3 × 120 mm / 2 × 140 mm
Bottom: 3 × 120 mm
Rear: 1 × 120 mm / 1 × 140 mm
Fan Specs
Model: F120Q Airflow Fan (Case Version)
Speed: 1,350 ± 150 RPM
Airflow: 60.2 CFM
Static Pressure: 1.05 mm-H2O
Noise: 24.1 dBA
Fan Connector: 3-pin
Product dimensionsW: 244 mm H: 544 mm D: 468 mm (with feet)
Shipping weight11.34 kg
Package size635 × 559 × 330 mm
Compatibility
Supported motherboard sizesE-ATX (Up to 27.7 mm), ATX, Micro-ATX, Mini-ITX
Radiator supportFront: Up to 420 mm
Top: Up to 360 mm
Rear: Up to 140 mm
CPU cooler height limit185 mm
PSU length limit200 mm
More details
Included fansFront - 3 × 120 mm

Other versions of this model

3 more in the same range

Questions about this item

How do I install the three pre-installed 120mm front fans, and what step do people get wrong?

The three 120mm fans come pre-installed at the front. The common mistake is forgetting to plug each fan into the motherboard or fan hub so they actually spin.

What maintenance will the high-performance mesh dust filters need later?

Remove the magnetic mesh panels and rinse or vacuum the dust off every few months to keep airflow at 60.2 CFM per fan.

What is the first limit I will hit when running a 420mm front radiator under sustained load?

The 185mm CPU cooler height clearance becomes the limiting factor once a thick 420mm radiator and fans occupy the front chamber.

More in Tower & Desktop PC Cases

Similar items