We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 92mm square cooling fan with 3-pin connector

OEM Industries

OEM Industries F9025S12H 92mm CPU cooler

SKU CH-AXX8-44MX0 MPN F9025S12H

A 92mm sleeve-bearing fan running at 2600 RPM with a 37.5dBA noise rating and 12V 0.30A power draw

  • Fan size92 mm
  • Bearing designSleeve Bearing
  • Power input connector3 Wires
  • Product colorBlack
  • Product typeFan only
  • 92 mm fan fits compact CPU coolers
  • 2600 RPM speed moves air through dense fins
  • 5 dBA noise stays low at full load
  • Sleeve bearing runs quietly for daily use
  • 12 V 0.30 A draw works with standard headers

92 mm sleeve-bearing fan for CPU cooling

This 92 mm fan uses a sleeve bearing and runs on 12 V at 0.30 A with a three-wire connector. It spins at 2600 RPM with a 10 percent tolerance and produces 37.5 dBA of noise. The unit is a fan only, supplied without a heatsink or mounting hardware for a complete cooler assembly. Buyers who need an integrated heatsink or liquid-cooling block should look elsewhere.

Simple three-pin connection

Installation requires a standard three-pin motherboard header or fan controller; the connector carries power, ground and a tachometer signal. The sleeve bearing is quiet at low speed but can develop rattle or reduced lifespan if mounted horizontally or exposed to high dust levels. Vibration increases noticeably above the rated 2600 RPM, so avoid over-volting the motor.

Check header current limit and physical clearance

Verify that your motherboard header can supply at least 0.3 A at 12 V without tripping protection. The frame measures 92 by 92 mm with a 25 mm thickness, so confirm the mounting holes match a 90 mm square pattern and that surrounding components allow the full depth. No LED lighting is present, so the fan will not illuminate a windowed case.

How it compares

Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 60% of the 1,559 comparable items (median $19.99).
Fan size 92 mm
Higher than about 70% of the 812 comparable items (median 80 mm).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model nameF9025S12H
Product colorBlack
Product typeFan only
Power
Power input connector3 Wires
Size & build
Fan size92 mm
Bearing designSleeve Bearing
More details
LED lightingNo

Questions about this item

How do I confirm the F9025S12H is spinning correctly after I connect it?

The fan should run at 2600 RPM with a tolerance of 10% and produce about 37.5 dBA of noise when powered by 12 V.

What comes with the F9025S12H and what must I source separately?

The box contains the 92 mm sleeve-bearing fan with a 3-wire 3-pin connector; mounting screws, a heatsink or a fan controller are not included.

Which version of the 92 mm cooler should I pick for a 12 V header?

The F9025S12H is the 12 V, 0.30 A model with a 3-pin connector; no other voltage or connector variants are listed for this MPN.

More in CPU Coolers & Heatsink Fans

Similar items