Cooler Master Hyper 212 Halo Black CPU Cooler RR-S4KK-20PA-R1
- 120 mm
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Blower-style cooler for select NEC laptops, running at 5 V and 0.40 W with a three-pin connector
This 5 V blower fan is built as a direct drop-in cooler for NEC VA80J, AV93J, VA73H, VA65H and 60H laptops. It draws 0.40 W and connects through a standard three-pin header, so the system can monitor speed without extra wiring. The two-tone housing matches the original aesthetic while keeping the assembly light.
When the original Sunon unit becomes noisy, spins down or fails completely, this model restores the factory airflow path without modification. The upgrade is worth it once thermals throttle the CPU or the bearing whine becomes audible, because the pinout and voltage match the board exactly. No soldering or adapter cables are required for the swap.
The blower comfortably handles the thermal load designed for the VA80J, AV93J, VA73H, VA65H and 60H platforms, delivering the specified 0.40 W of cooling power. It runs out of headroom in any larger chassis or higher-wattage configuration, and the three-pin connector will not fit proprietary four-pin or PWM-only headers found on other brands.
Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Model name | GB0535AEV2-8 |
| Product color | 2-Tone |
| Product type | Fan only |
| Power | |
| Power input connector | 3 Pin |
| More details | |
| LED lighting | No |
The fan is listed for NEC VA80J, AV93J, VA73H, VA65H and 60H models; check your service manual to confirm the exact mounting points before ordering.
Remove the old fan, align the blower outlet with the heatsink duct, plug the 3-pin connector into the motherboard header, and secure the screws — the step often missed is routing the wires clear of the impeller.
Replace it when bearing noise increases, airflow drops noticeably, or the 5V 0.40W motor fails to spin up at boot.
More in CPU Coolers & Heatsink Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?