OEM Industries MC20080V2-D010-A99 30mm Maglev CPU cooler

30 mm Maglev CPU Cooler

This 30 mm fan uses a maglev bearing for quiet, low-vibration operation. It runs on a 5 V supply and draws only 0.45 W through a simple two-wire lead. The compact frame suits tight enclosures or secondary cooling spots where space is at a premium. No LED lighting is fitted, keeping the unit visually neutral.

Two-Wire 5 V Power Limit

The cooler connects via a basic two-wire header, so speed reporting or PWM control is not available. Voltage is fixed at 5 V, meaning the fan runs at a constant rate unless the host board provides variable voltage on that header. Power draw stays at 0.45 W, which most 5 V fan headers can supply without issue. Builders needing automated speed curves should verify header capabilities first.

Clearance and Header Check

Measure the available height above the CPU socket to confirm the 30 mm thickness fits alongside memory modules or VRM heatsinks. Ensure the motherboard or controller offers a 5 V two-pin fan header; three- or four-pin headers may not deliver the correct voltage on the outer pins. No mounting hardware is described, so verify the retention mechanism matches your socket layout before ordering.