OEM Industries MGT5012XB-W10 12V 0.19A 2-wire 9-blade CPU cooler

MGT5012XB-W10 12V 2-pin cooler

This 12V 0.19A cooler combines a nine-blade fan with a heatsink for component thermal management. The two-wire power connector delivers fixed-speed operation without pulse-width modulation control. It is intended for builders fitting a compact air-cooling solution onto a graphics card or similar add-in board. The two-tone finish distinguishes the unit visually inside a chassis.

Check 2-pin header and mounting clearance

Verify that the target board provides a two-pin 12V header rated for at least 0.19A before ordering. Confirm physical space around the component slot so the heatsink and fan assembly can sit without fouling adjacent slots, capacitors or cable routing. The fixed-speed design means the fan runs continuously whenever the header is powered. No four-pin PWM or three-pin tachometer signal is supported by this connector.

Aluminium heatsink with nine-blade fan

The aluminium heatsink draws heat from the component base while the nine-blade fan moves air across the fins. Two-pin power simplifies wiring but removes speed monitoring and automatic curve control. The 12V 0.19A rating keeps current draw low for standard headers. Daily use brings constant airflow noise at full voltage with no software-adjustable quiet mode.