We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square fan 25mm thick 3-pin connector

OEM Industries

OEM Industries MGT8012HB-A25 80mm 25mm 12V 0.24A 3-pin CPU cooler

SKU CH-Y1ZD-2WVPN

80 mm square fan with ball bearing, 12 V 0.24 A three-pin power for server CPU cooling

  • Fan size80 mm
  • Bearing designBall
  • Power input connector3 Pin
  • Product colorBlack
  • Product typeFan only
  • 80 mm fan fits tight server and case spaces
  • 25 mm thickness balances airflow and clearance
  • Ball bearing design extends operating life
  • 12 V 0.24 A draw keeps power use low
  • Three pin connector enables speed monitoring

Compact 80 mm server fan

The OEM Industries MGT8012HB-A25 is an 80 mm square fan built for 12 V server and workstation chassis. It draws 0.24 A through a standard three-pin connector and uses a ball bearing for continuous operation. The black frame fits tight 80 mm mounts in rack-mount or small-form-factor systems.

Replaces worn 80 mm ball-bearing units

Swap this fan in when an existing 80 mm cooler becomes noisy, vibrates or fails to spin at full speed. The 12 V 0.24 A rating matches many legacy server trays, so the upgrade is worthwhile when the original sleeve-bearing fan has seized or the airflow has dropped below specification.

Direct three-pin drop-in

Installation requires aligning the four mounting holes and pressing the three-pin plug onto the motherboard or backplane header. The only common issue is reversed polarity if the keyed connector is forced the wrong way; otherwise the fan seats flush in standard 80 mm cut-outs.

How it compares

Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 80% of the 1,559 comparable items (median $19.99).
Fan size 80 mm
Typical for this category: the median of 812 items is 80 mm.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model nameMGT8012HB-A25
Product colorBlack
Product typeFan only
Power
Power input connector3 Pin
Size & build
Fan size80 mm
Bearing designBall
More details
LED lightingNo

Questions about this item

What mounting holes does the 80mm square frame use?

The fan uses the standard 80mm square mounting pattern with four corner holes spaced for 80mm centres.

How do I connect the 3-pin connector so speed reporting works?

Plug the 3-pin header onto a motherboard 3-pin or 4-pin fan header aligning the key; the third wire carries the tach signal for RPM monitoring.

When should I replace the ball-bearing fan?

Replace the fan when bearing noise becomes audible or RPM drops below the rated speed under 12V 0.24A load.

More in CPU Coolers & Heatsink Fans

Similar items