Optical Network Video Technologies ONV-POE31108PFB-at 10-port PoE network switch

10-port PoE switch for IP camera deployments

This switch provides eight 10/100 Mbps PoE ports and two gigabit combo TP/SFP uplinks. It delivers up to 30 W per PoE port under the IEEE 802.3af/at standard with a total power budget of 250 W. The 5.6 Gbps non-blocking bandwidth and 16K address table support typical surveillance networks. Operating temperatures range from -20 °C to 55 °C.

Suited for small surveillance installs.

Installers powering IP cameras, VoIP phones or wireless access points over Cat5 cable up to 100 metres will find the port count and power budget adequate. Buyers who need faster than 100 Mbps on the powered device ports, or who require Layer 3 routing features, should look at a different model. The fanless design and wide temperature range suit wall-mounted cabinets in unconditioned spaces.

30 W per PoE port decides the camera choice

Each of the eight PoE ports supplies a maximum of 30 W, so the switch can run eight IEEE 802.3at class 4 devices simultaneously within the 250 W budget. If your cameras or access points draw more than 30 W each, this unit cannot power them. The two gigabit combo ports accept either RJ45 or SFP modules for uplink flexibility.