Canon 5322B001 projector lamp 245 Watt for LV-7490 LV-8320
- 245 W
- 3,000 (Normal) - 5,…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 240 W Osram P-VIP lamp module with housing, rated for 3,000 hours normal or 6,000 hours economy use
The Optoma BL-FP240B is a complete lamp assembly that pairs a new Osram P-VIP 240W bulb with its housing. It arrives fully assembled for direct installation in compatible Optoma projectors. The unit is supplied new and built to ISO 9001 quality checks covering beam performance, ignition, voltage, connections and run-time.
Swapping the spent module for this 240W unit returns the projector to its factory light output. Rated life reaches 3000 hours in normal mode and 6000 hours in economy mode. The upgrade is worth it when image brightness has fallen below usable levels or the projector signals a lamp replacement warning.
Installation consists of removing the old module and seating the new one in its place; no soldering or cable routing is involved. The most common issue is forgetting to reset the projector’s lamp-hour counter after fitting the module, which leaves the replacement warning active. Handling the bulb with bare fingers can also shorten life, so clean gloves or a cloth are recommended.
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 3,000 (Normal) - 6,000 (Economy) Hrs. |
| Power | |
| Power rating | 240 W |
The BL-FP240B is a complete module with a 240W Osram P-VIP bulb inside a housing designed for specific Optoma models; check your projector manual for the exact part number before ordering.
Power off and unplug the projector, remove the old lamp cage, insert the new BL-FP240B until it clicks, secure the screws, then use the menu to reset the lamp timer so the 3,000-hour normal or 6,000-hour economy rating tracks correctly.
Expect around 3,000 hours in normal mode or up to 6,000 hours in economy mode before brightness drops enough to warrant a new lamp module.
More in Replacement Projector Bulbs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?