OPTOMA SP.83C01GC01 300W projector lamp
A new 300W replacement lamp module with 2,000-hour rated life for Optoma projectors
- Power rating300 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Ready-to-install module saves setup time
- 300W UHP bulb matches original brightness
- 2,000-hour rated life extends replacement cycle
- Built to ISO 9001 quality standards
- OEM Philips bulb ensures reliable ignition
Replacement lamp for Optoma projectors
The Optoma SP.83C01GC01 is a new 300W projector lamp module supplied with a Philips UHP bulb inside a pre-assembled housing. It is designed for owners of compatible Optoma projectors who need a direct replacement when the original lamp reaches end of life.
Replaces the original projector lamp module
This unit substitutes the factory-fitted lamp that shipped with the projector. The jump is worth it when the existing lamp has dimmed significantly or the projector displays a lamp-replacement warning after approximately 2,000 hours of use.
Check the exact projector model before ordering
Verify that your Optoma projector lists SP.83C01GC01 as the correct lamp part number. Confirm the projector accepts a 300W UHP lamp and that the housing matches the mechanical keying of your device.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $95.99
- Cheaper than about 54% of the 9,513 comparable items (median $99.99).
- Power rating 300 W
- Higher than about 87% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 300 W |
Questions about this item
Which Optoma projectors accept the SP.83C01GC01 lamp module?
The SP.83C01GC01 is a direct replacement module for Optoma projectors that originally shipped with this part number; check your projector’s manual or service label to confirm the exact model match before purchase.
What is the correct way to install the pre-assembled housing without damaging the new Philips UHP bulb?
Power off and cool the projector completely, remove the lamp cover, release the retaining screws, slide the old module out, insert the new SP.83C01GC01 housing straight in until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu.
When should I plan to replace this 300 W lamp based on its rated life?
The lamp is rated for 2,000 hours of typical use; monitor the projector’s built-in hour counter and keep a spare module ready as you approach that figure to avoid unexpected downtime.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. CP-EX400 Projector Lamp 225W DT01491
- 225 W
- 5,000 (Normal) - 6,…
Hitachi, Ltd. CP-AX2503 Projector Lamp 225W DT01511
- 225 W
- 4,500 (Normal) - 6,…





