Orico 2.5" SATA to USB 3.0 Drive Enclosure DIY Sticker 6TB
- 2.5 in (6.35 cm)
- USB 3.0
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5-inch SATA drive enclosure with USB 3.1 Type-C, UASP support and tool-free installation for drives up to 6TB
External Interface USB 3.1
This Orico 2580U3 enclosure turns a single 2.5″ SATA hard drive or SSD into a portable USB 3.1 Type-C drive. It accepts drives up to 6 TB and 9.5 mm thick, making it suited for laptop upgrades, console storage expansion or simple file transfers between computers. The black plastic shell includes a vintage-style tape label area for quick visual identification.
Verify that your 2.5″ drive is 7 mm or 9.5 mm thick; a 12.5 mm drive will not fit. The enclosure supports SATA I, II and III drives and works with Windows 8, Windows 10 and Mac OS 8 or later. A host port with USB 3.1 Gen 1 or USB 3.0 is required to reach the stated 6 Gbps link speed and to benefit from the UASP acceleration protocol.
The enclosure opens without tools and the drive slides in within three seconds, supporting hot-swap operation. Internal EVA foam pads cushion the drive against shock and fill the gap when a thinner 7 mm unit is installed. An automatic sleep mode spins the drive down after ten minutes of inactivity to reduce wear and power draw.
Measured against everything we stock in External Drive Enclosures, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ORICO |
| Product line | ORICO 2580U3 |
| Product color | Black |
| Product type | Enclosure |
| Storage | |
| Drive interface | SATA I/II/III |
| Supported drives | Single HDD |
| Bay count | 1 Bay |
| Max capacity per bay | Up to 6 TB |
| Ports & slots | |
| External connection | USB 3.1 |
| Size & build | |
| Size | 2.5 in (6.35 cm) |
| Main material | Plastic |
| Product dimensions | 128 mm(L)*80 mm(W)*14 mm(H) |
Other versions of this model
The enclosure is sold empty; you install a single 2.5" SATA I/II/III drive up to 9.5 mm thick yourself.
Yes, any 2.5" SATA drive up to 9.5 mm height and 6 TB capacity is supported; thinner 7 mm drives should use the included sponge pad.
The interface tops out at 6 Gbps; with UASP enabled on a compatible host you can see roughly 70 % higher sustained rates than a standard USB 3.0 connection.
More in External Drive Enclosures
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?