OVERTURE PETG Filament 1.75mm Black 4kg 4-Pack

1.75 mm PETG 4 kg bundle

This four-spool pack supplies 4 kg of black PETG filament wound on paper spools. Each 1 kg reel is neatly wound to reduce tangles during long prints. The material sits between PLA and ABS for strength, offering better impact resistance than PLA while remaining easier to print than ABS. Makers producing functional parts, outdoor fixtures or larger batches benefit from the single-colour volume.

FDM printer compatibility and setup

The 1.75 mm diameter fits most common FDM printers without hardware changes. A heated bed capable of 80 °C to 90 °C and a nozzle temperature of 230 °C to 250 °C are required for reliable adhesion. Running the part-cooling fan at 100 % helps control overhangs and stringing. The filament frees you from frequent spool changes on big jobs and suits printers that accept standard 1 kg spool dimensions.

Print temperature, cooling and dimensional control

Extrusion at 230 °C to 250 °C with the bed at 80 °C to 90 °C yields consistent layer bonding. Keeping the fan at 100 % manages heat buildup in the hot end and improves bridge quality. Dimensional accuracy is held to ± 0.02 mm, supporting tight fits in mechanical assemblies. The PETG formulation resists moisture and UV exposure, so printed parts retain strength in outdoor use.