We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PLA+ 2.0 filament refill coil 1.75mm 1kg spoolless

OVERTURE PLA+ 2.0 Refill 1.75mm 1kg White

SKU CH-X43V-EZ6SG

Spoolless 1.75 mm PLA+ refill enables printing speeds up to 300 mm/s with enhanced toughness and reduced waste

  • Diameter1.75
  • Product colorWhite
  • Main materialPolylactic Acid
  • Product weight1 kg
  • Spoolless refill cuts plastic waste and works with Bambu Lab AMS reusable spool
  • High-fluidity formula enables printing speeds up to 300 mm/s without clogging or sagging
  • Upgraded PLA+ 2.0 delivers tougher parts with stronger interlayer adhesion
  • Optimised melt flow reduces stringing and brittle prints on standard and high-speed printers
  • 75 mm diameter and 1 kg weight suit most desktop FDM machines

Spoolless Refill for Reusable Spools

This 1 kg PLA+ 2.0 refill arrives without a disposable spool and snaps directly onto a Bambu Lab AMS reusable spool or other master spools. The design cuts plastic waste and shipping weight, making it a practical choice for makers who want a greener workflow.

High-Speed Formulation Up to 300 mm/s

A high-fluidity, rapid-cooling recipe keeps extrusion consistent at speeds far above the 100 mm/s limit of standard PLA. Sharper detail, less stringing and stronger inter-layer adhesion mean reliable prints even when the printer is pushed to 300 mm/s.

Tougher Material with Enhanced Impact Resistance

Compared with the earlier 1.75 mm PLA+, version 2.0 adds noticeably more toughness and optimized melt flow. The result is fewer brittle failures and reduced clogging on both standard and high-speed machines.

How it compares

Measured against everything we stock in 3D Printer Filament, at today’s prices. Recalculated every night.

Price $22.99
Cheaper than about 60% of the 305 comparable items (median $27.99).

Specifications

Product
Brand nameOVERTURE
Product colorWhite
Size & build
Main materialPolylactic Acid
Diameter1.75
Product weight1 kg

Questions about this item

What spool standard does this 1.75mm PLA+ 2.0 refill fit?

It snaps onto the Bambu Lab AMS reusable spool and other master spools designed for spoolless refills.

What physical step is required before the filament can be loaded?

You must snap the coil onto a reusable spool; the refill has no flange of its own and will not feed from the box.

How do you install the refill without tangling the coil?

Hold the coil flat, align its centre hole with the spool hub, press until the tabs click, then unwind the first metre slowly before feeding.

More in 3D Printer Filament

Similar items