Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Single 128 GB DDR4 2933 ECC registered RDIMM for TYAN S7100 and Lenovo ThinkSystem SR860, SR950 servers
This 128GB DDR4 2933 module is an ECC registered RDIMM built for TYAN S7100 series motherboards and Lenovo ThinkSystem SR860 and SR950 servers. It operates at 1.2V with CL21 latency and an 8Rx4 rank configuration. The registered buffer and error correction make it suitable only for workstation and server platforms; it will not work in standard desktop computers.
A single 128GB stick provides very high density for memory-intensive server workloads such as virtualization, large databases or in-memory analytics. The 8Rx4 organisation delivers this capacity within one 288-pin slot, leaving remaining DIMM sockets free for further expansion. Systems that cannot address 128GB per module or that require unbuffered or load-reduced DIMMs cannot use this memory.
The module runs at the JEDEC-standard PC4-23400 2933 MT/s rate and is backward compatible with 2133, 2400 and 2666 MT/s bus speeds. Registered signalling adds one clock cycle of latency versus unbuffered DDR4, which is the expected trade-off for signal integrity at high capacity. Mixing this RDIMM with unbuffered or load-reduced modules is not supported and will prevent the system from booting.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D48R4128G |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | 21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 8Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Yes, the module is backward compatible with 2133 MHz, 2400 MHz and 2666 MHz systems and will run at the highest speed the platform supports.
Check the BIOS memory summary for 128 GB at 2933 MT/s with ECC enabled, then run a memory diagnostic such as MemTest86 to verify zero correctable errors.
The package contains only the 128 GB DDR4 2933 CL21 ECC registered RDIMM; no brackets, cables or additional modules are supplied.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?