Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A single 128GB DDR4 2933 ECC registered RDIMM with CL21 latency and 1.2V operation for Dell PowerEdge R740, R740xd, R840, R940 and R940xa servers
This OWC module delivers 128GB of DDR4 ECC Registered memory rated at 2933 MT/s with CL21 latency and 1.2V operation. The 288-pin RDIMM uses an 8Rx4 organisation and is validated for Dell PowerEdge R740, R740xd, R840, R940 and R940xa servers. It cannot be mixed with unbuffered or load-reduced DIMMs.
The part suits teams extending the life of compatible PowerEdge platforms or assembling new servers that require registered ECC memory at this density and speed. It will not work in standard desktop PCs, workstations that demand unbuffered DIMMs, or systems limited to lower maximum module capacities.
The single specification that decides fit is the registered ECC RDIMM form factor. Only platforms whose memory controllers and BIOS explicitly support registered error-correcting modules at DDR4 2933 can use this upgrade; any system lacking that support will not boot with this module installed.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D48R4128G |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | 21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 8Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Dell PowerEdge R740 Dell PowerEdge R740xd Dell PowerEdge R840 Dell PowerEdge R940 Dell PowerEdge R940xa |
The module operates at 1.2V, matching the JEDEC DDR4 standard for registered ECC DIMMs, so power draw stays within the platform's normal memory budget during continuous operation.
It is validated for Dell PowerEdge R740, R740xd, R840, R940 and R940xa systems that accept 288-pin DDR4 registered ECC memory.
Yes, the DIMM is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, though the system will clock all modules to the lowest common rate.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?