We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 ECC registered RDIMM sticks 240-pin 16GB kit

OWC

OWC 16GB 2x8GB DDR3 1333 ECC Registered RDIMM Dell PowerEdge R920 T410 T610 T710

SKU CH-2376-Q8TFY

16 GB DDR3 1333 ECC registered RDIMM kit for Dell PowerEdge R920, T410, T610 and T710 servers

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • CAS latencyCL9
  • Rated voltage1.5 V
  • Buffer typeRegistered
  • Memory rank2Rx4

Capacity 16GB (2 x 8GB)

  • 16 GB DDR3 1333 ECC registered kit boosts server capacity
  • CL9 1.5 V 2Rx4 modules deliver stable error-correcting performance
  • 240-pin RDIMM form factor fits Dell PowerEdge R920 T410 T610 T710
  • Two matched 8 GB sticks enable dual-channel throughput
  • Replaces Dell part numbers A2984886 A2984887 A3198153 A3721483 A3858996 A4051416 A4051431 A4105734 A4188260 A4188265 A4188276 A6199968

System-Specific DDR3 ECC RDIMM Kit

This 16 GB kit contains two 8 GB registered DDR3 modules built for Dell PowerEdge servers. It targets administrators upgrading R920, T410, T610 or T710 platforms that require ECC registered memory. Standard desktop boards cannot use these modules because they expect unbuffered DIMMs.

Registered ECC With 2Rx4 Organisation

The single decisive attribute is the registered ECC design with a 2Rx4 rank layout. Only systems that explicitly support registered error-correcting modules will POST with this kit; mixing it with unbuffered memory will prevent boot.

Dual-Module Capacity For Multi-Socket Headroom

Two 8 GB sticks populate two slots and leave remaining DIMM sockets free for further expansion on supported chassis. The kit reaches its practical limit when all registered channels are filled or when the platform’s maximum registered capacity is reached.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $44.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.81 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1R3D32R4016P
Total capacity16 GB (2 × 8 GB)
Product type240-Pin DDR3 ECC RDIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Memory
CAS latencyCL9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell PowerEdge R920
Dell PowerEdge T410
Dell PowerEdge T610
Dell PowerEdge T710

Other versions of this model

5 more in the same range

Questions about this item

What does the 1333 MHz rating mean once the modules are installed in a PowerEdge server?

The modules run at 1333 MHz DDR3 speed with CL9 latency, delivering the standard PC3-10600 data rate for registered ECC memory in these systems.

How does the PC3-10600 designation limit performance in practice?

PC3-10600 sets the maximum JEDEC transfer rate for DDR3 1333; the registered buffer and ECC add a small latency overhead but maintain data integrity in server workloads.

What physical slot and form factor do these 240-pin RDIMMs need to fit in a T410, T610, T710 or R920?

They require a standard 240-pin DDR3 DIMM socket and the registered RDIMM form factor; no heat spreader is fitted, so they clear normal server memory cages.

More in Model-Specific Memory Upgrades

Similar items