We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, thin rectangular SODIMM module

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 260-Pin SODIMM memory upgrade

SKU CH-82J1-4TV8V

16 GB DDR4 2666 MHz CL19 SODIMM for Dell OptiPlex 3060, 3070, 5060, 5070 Micro and 5260 AIO

  • Total capacity16 GB
  • Rated speedDDR4 2666 (PC4 21300)
  • CAS latencyCL19
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • Memory rank2Rx8
  • 16GB capacity adds headroom for multitasking
  • DDR4 2666MHz CL19 speed matches system specs
  • 2V low voltage reduces power draw
  • 260-pin SODIMM fits Dell OptiPlex Micro and AIO slots
  • JEDEC and RoHS compliant for warranty-safe upgrade

16 GB DDR4 SODIMM for Dell OptiPlex Micro and AIO

This 16 GB DDR4 2666 MHz module upgrades compatible Dell OptiPlex 3060 Micro, 3070 Micro, 5060 Micro, 5070 Micro and 5260 AIO systems. It uses a 260-pin SO-DIMM form factor, runs at 1.2 V and meets JEDEC PC4-21300 CL19 specifications. The unbuffered non-ECC design installs without tools in the single memory slot of these compact PCs.

Who this suits and who should look elsewhere

Builders upgrading the listed OptiPlex Micro or AIO models gain a straightforward capacity increase. Buyers needing ECC error correction, registered modules, higher speeds than 2666 MHz or a different pin count cannot use this part. Systems outside the five named Dell models may not accept this specific module.

260-pin DDR4 2666 MHz CL19 specification

The decisive specification is the 260-pin DDR4 2666 MHz CL19 interface; only platforms designed for this exact SO-DIMM type will recognise the module. Compatibility is limited to the Dell OptiPlex 3060 Micro, 3070 Micro, 5060 Micro, 5070 Micro and 5260 AIO. Verification against the system service manual is required before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $78.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $4.94 per GB
Cheaper than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number2S6D42R816 GB
Total capacity16 GB
Product type260-Pin DDR4 Non-ECC SODIMM
Performance
Rated speedDDR4 2666 (PC4 21300)
Memory
CAS latencyCL19
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell OptiPlex 3060 Micro
Dell OptiPlex 3070 Micro
Dell OptiPlex 5060 Micro
Dell OptiPlex 5070 Micro
Dell OptiPlex 5260 AIO

Questions about this item

What DDR4 speed does the PC4-21300 2666MHz rating cap at in a Dell OptiPlex 5070 Micro?

The module runs at 2666MHz CL19 at 1.2V and will down-clock to 2400MHz or 2133MHz if the system requires it.

Will the 260-pin SODIMM fit the single memory slot inside a Dell OptiPlex 3060 Micro?

Yes, the 260-pin unbuffered non-ECC SODIMM matches the sole DDR4 SO-DIMM slot in the 3060 Micro and other listed OptiPlex Micro and AIO models.

What is the correct way to seat the module so the retention clips lock on a Dell OptiPlex 5260 AIO?

Insert the SODIMM at roughly a 30-degree angle until the gold contacts disappear, then press down firmly until both side clips snap into the notches.

More in Model-Specific Memory Upgrades

Similar items