We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM HP Pro 300 G6 G3 G2

SKU CH-F8QK-MMSSD

16GB DDR4 2666MHz CL19 1.2V UDIMM upgrades HP Pro 300 G6 G3 G2 desktops

  • Total capacity16 GB
  • Rated speedDDR4 2666 (PC4 21300)
  • CAS latencyCL19
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • Memory rank2Rx8
  • 16GB DDR4 boosts multitasking on HP Pro 300 desktops
  • 2666MHz CL19 speed matches factory specifications exactly
  • 2V low voltage reduces power draw and heat
  • 288-pin UDIMM fits G6, G3 and G2 models directly
  • JEDEC compliant and ROHS certified for warranty-safe upgrade

HP Pro 300 G6 G3 G2 Upgrade

This 16GB DDR4 2666MHz CL19 UDIMM is built for HP Desktop Pro 300 G6, A 300 G3, A G2 and A G3 systems. It targets owners of those specific models who need more memory for everyday multitasking and larger workloads. The module runs at 1.2V and fits the standard 288-pin desktop slot.

Replaces Slower DDR4 Modules

The stick operates at PC4-21300 2666MHz and is backward compatible with 2133MHz and 2400MHz slots. The jump is worth it when your current memory runs at those lower speeds or when empty slots limit total capacity. It will not benefit systems that require ECC or registered memory.

Simple DIY Installation

Installation is a straightforward DIY task: power off, open the case, align the notch and press until the clips click. No heat spreader means a low profile that clears most CPU coolers. The usual issue is mixing speeds; the system will downclock all modules to the slowest installed speed.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $81.99
Cheaper than about 70% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $5.12 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number2U6D42R816 GB
Total capacity16 GB
Product type288-Pin DDR4 Non-ECC UDIMM
Performance
Rated speedDDR4 2666 (PC4 21300)
Memory
CAS latencyCL19
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsHP Desktop Pro 300 G6
HP Desktop Pro A 300 G3
HP Desktop Pro A G2
HP Desktop Pro A G3

Other versions of this model

5 more in the same range

Questions about this item

Does the 288-pin DDR4 UDIMM fit the HP Pro 300 G6 motherboard slots?

Yes, the 288-pin DDR4 UDIMM matches the standard desktop DIMM slots used in the HP Pro 300 G6, A 300 G3, A G2 and A G3 systems listed for this module.

What is the correct way to seat the module, and what step do people often miss?

Align the notch on the module with the key in the slot, press down firmly until both retention clips click into place, and verify the clips are fully locked — the step most often missed is not pressing hard enough to engage both clips.

Will the 16 GB 2666 MHz CL19 kit need any firmware updates or battery replacements over time?

No firmware updates or battery replacements are required; the module is a passive DRAM component that operates at 1.2 V and has no serviceable parts.

More in Model-Specific Memory Upgrades

Similar items