We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green DDR4 RDIMM module with black chips, no heat spreader

OWC

OWC 16GB DDR4 3200 ECC Registered RDIMM CL22 2Rx8 1.2V 288-pin

SKU CH-3KJ5-WNE3H

16 GB DDR4-3200 ECC registered RDIMM for QNAP TDS-h2489FU, TVS-h474, TVS-h674, TVS-h874 and TS-1655

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • CAS latencyCL22
  • Rated voltage1.2 V
  • Buffer typeRegistered
  • Memory rank2Rx8
  • ECC registered design protects data integrity in server workloads
  • 3200 MT/s DDR4 speed matches QNAP system specifications
  • 16 GB capacity in a single 2Rx8 module
  • 2 V operation reduces power draw in dense configurations
  • Validated for QNAP TDS-h2489FU, TVS-h474, TVS-h674, TVS-h874 and TS-1655

16GB ECC Registered DDR4 Module

This OWC 16GB DDR4 3200 ECC Registered RDIMM is built for QNAP NAS models including the TDS-h2489FU TVS-h474 TVS-h674 TVS-h874 and TS-1655. It delivers 16GB capacity at DDR4 3200 speed with CL22 latency and 1.2V operation. The 288-pin 2Rx8 registered design provides error correction for data integrity in server workloads.

Suited for QNAP NAS expansion; not for desktops

This module suits administrators upgrading the listed QNAP systems to increase memory capacity for virtualization or heavy file serving. It will not work in standard desktop computers or consumer motherboards because it requires registered ECC support. Builders needing unbuffered memory or non-ECC modules should look elsewhere as mixing registered with unbuffered memory is not supported.

Steady throughput under sustained server loads

Under continuous operation the registered buffer reduces electrical load on the memory controller helping maintain stable timings during long backup or virtualization tasks. ECC detection corrects single-bit errors on the fly preventing silent data corruption during extended uptime. The JEDEC compliant 1.2V DDR4 3200 specification ensures consistent bandwidth without thermal throttling in enclosed NAS chassis.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $105.99
Cheaper than about 67% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $6.62 per GB
Cheaper than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number3R2D42R816 GB
Total capacity16 GB
Product type288-Pin DDR4 ECC RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsQNAP TDS-h2489FU
QNAP TVS-h474
QNAP TVS-h674
QNAP TVS-h874
QNAP TS-1655

Other versions of this model

5 more in the same range

Questions about this item

Will this registered ECC RDIMM work alongside unbuffered memory already installed in my QNAP TVS-h674?

No — the module is registered ECC and cannot be mixed with unbuffered DIMMs; all slots must use registered ECC memory for the system to operate correctly.

What must my QNAP TS-1655 already support for this 16 GB DDR4 3200 CL22 2Rx8 1.2 V 288-pin RDIMM to function?

The NAS must accept DDR4 3200 registered ECC RDIMMs with 2Rx8 organisation; the listed QNAP models are validated for this exact specification.

How can I confirm the 16 GB module is running at DDR4 3200 with ECC active after installation?

Check the QNAP system information or resource monitor — it will show 16 GB at 3200 MT/s and report ECC status as enabled when the module is recognised.

More in Model-Specific Memory Upgrades

Similar items