Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4 2666 ECC VLP UDIMM for Supermicro X11SCA and X11SCH motherboards
This 16GB DDR4 2666 CL19 module is built for Supermicro X11SCA and X11SCH server boards. It delivers 2Rx8 unbuffered ECC operation at 1.2V in a very low-profile 288-pin UDIMM form factor. The part number 2E6V42R816GB identifies a single DIMM validated for those specific platforms.
Installation uses a standard 288-pin DDR4 slot on the listed Supermicro models. The very low profile height clears tight heatsink or airflow spaces inside 1U and 2U chassis. JEDEC and ROHS compliance ensures the upgrade does not void the original system warranty.
This module targets administrators adding capacity to X11SCA-F, X11SCA-W, X11SCH-F, X11SCH-LN4F or X11SCL-F boards. Builders needing registered DIMMs, higher speeds, non-ECC memory or support for other motherboards should look elsewhere.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2E6V42R816 GB |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC VLP UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro Motherboard X11SCA-F Supermicro Motherboard X11SCA-W Supermicro Motherboard X11SCH-F Supermicro Motherboard X11SCH-LN4F Supermicro Motherboard X11SCL-F |
The module operates at 1.2 V with no heat spreader, so sustained load will hit the DRAM junction temperature limit before any other constraint.
At 1.2 V and DDR4 2666 speed the module draws only a few watts and produces minimal heat, keeping noise impact negligible in a populated system.
It is validated for Supermicro X11SCA-F, X11SCA-W, X11SCH-F, X11SCH-LN4F and X11SCL-F boards; one of those must be present.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?