Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 GB DDR4 ECC UDIMM running at 2666 MHz with CL19 latency, built for Supermicro SuperServer 1019 and 5019 models
This module is a 16GB DDR4 2666 (PC4-21300) CL19 2Rx8 VLP ECC unbuffered DIMM. It runs at 1.2V and uses a 288-pin layout without a heat spreader. The part is validated for Supermicro SuperServer 1019C-FHTN8, 1019C-HTN2, 1019S-MC0T, 1019S-WR and 5019C-FL.
Administrators expanding memory in the listed Supermicro SuperServer models will find a direct, JEDEC-standard fit. Buyers who need registered or load-reduced DIMMs, a different voltage, or compatibility with other server platforms should look elsewhere.
A single 16GB stick provides headroom for multiple virtual machines or large in-memory datasets on supported systems. Capacity runs out when the application set exceeds the total installed memory across all populated slots.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2E6V42R816 GB |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 ECC VLP UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro SuperServer 1019C-FHTN8 Supermicro SuperServer 1019C-HTN2 Supermicro SuperServer 1019S-MC0T Supermicro SuperServer 1019S-WR Supermicro SuperServer 5019C-FL |
Yes, the module uses the standard 288-pin DDR4 UDIMM form factor, so an available slot of that type is required.
OWC recommends matching capacity, speed and manufacturer for optimal performance; mixing different ranks or timings may work but is not guaranteed.
Check the system BIOS or operating system memory report — it should show the new 16GB DIMM at 2666 MT/s with ECC active.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?