We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

OWC

OWC 2U6D41R808GB 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM memory upgrade

SKU CH-N3C0-PB3JY

8GB DDR4 2666MHz CL19 1.2V UDIMM upgrade for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290

  • Total capacity8 GB
  • Rated speedDDR4 2666 (PC4 21300)
  • CAS latencyCL19
  • Rated voltage1.2 V
  • Buffer typeUnbuffered
  • Memory rank1Rx8
  • Boosts system responsiveness with 8GB DDR4 2666MHz CL19 memory
  • Guaranteed fit for HP OMEN X 900-250ng, 900-251ng, 900-280nz, 900-284nz, 900-290
  • Runs efficiently at 1.2V standard DDR4 voltage
  • JEDEC compliant for warranty-safe upgrade
  • Simple DIY installation with 288-pin UDIMM form factor

OWC 8GB DDR4 2666MHz CL19 UDIMM

This OWC memory module adds 8GB of DDR4 capacity at 2666MHz with CL19 timing. It is built for HP OMEN X desktops including the 900-250ng, 900-251ng, 900-280nz, 900-284nz and 900-290 models. The 1.2V unbuffered non-ECC design fits standard 288-pin desktop slots. Builders needing ECC error correction or registered modules should look elsewhere.

JEDEC and RoHS compliant specification

The module meets JEDEC standard specifications and is RoHS compliant, ensuring a warranty-safe upgrade that follows industry rules. Backward compatibility lets it run at 2133MHz or 2400MHz if the system requires a lower speed. No extra software, heat spreaders or accessories are bundled with this stick.

Simple DIY installation in most cases

Installation is a straightforward DIY task on compatible HP OMEN X systems; align the notch and press until the clips lock. The most common issue is mixing speeds, causing the system to downclock all memory to the slowest module. Systems that require registered or ECC memory will not accept this unbuffered non-ECC stick.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $46.99
Cheaper than about 78% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.87 per GB
Cheaper than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number2U6D41R808 GB
Total capacity8 GB
Product type288-Pin DDR4 Non-ECC UDIMM
Performance
Rated speedDDR4 2666 (PC4 21300)
Memory
CAS latencyCL19
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsHP OMEN X 900-250ng
HP OMEN X 900-251ng
HP OMEN X 900-280nz
HP OMEN X 900-284nz
HP OMEN X 900-290

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR4 module need any maintenance or replacement during its service life?

The module is a solid-state component with no moving parts and no heat spreader, so it requires no routine maintenance and is designed to last the lifetime of the system under normal use.

What limit appears first when the CL19 2666MHz memory runs under sustained load?

The primary limit is the CL19 latency timing at 2666MHz; the module will not exceed this rated speed or tighten latency without manual overclocking, which is not supported by the HP OMEN X platform.

How much heat and power does the 1.2V 8GB UDIMM produce when running all day?

Operating at 1.2V without a heat spreader, the module draws minimal power and generates low heat, staying within standard JEDEC thermal limits for continuous desktop operation.

More in Model-Specific Memory Upgrades

Similar items