OWC 32GB (4x8GB) DDR3L 1600 ECC Registered RDIMM Kit
- 32 GB (4 × 8 GB)
- DDR3L 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB kit of DDR3 1333 ECC registered RDIMMs for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR3 1333 modules built to PC3-10600 CL9 timings at 1.5 V. The 240-pin registered DIMMs use 2Rx4 organisation and are validated for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards. They are designed for workstation and server platforms that require error-correcting registered memory.
The kit replaces unbuffered DIMMs or smaller registered sticks in the listed Supermicro boards; mixing registered with unbuffered memory will prevent boot. The upgrade is worth it when the system needs the full 32 GB capacity for virtualization, database or file-server workloads and the motherboard firmware supports 16 GB registered DIMMs per slot.
Installation follows standard 240-pin DDR3 procedure: power down, open the retention levers, align the notch and press firmly until the levers click. Common issues include leaving a lever unlatched, populating slots in the wrong channel order for the specific board, or attempting to use these modules in a desktop board that only accepts unbuffered memory.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R4032P |
| Total capacity | 32 GB (2 × 16 GB) |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Supermicro Motherboard X8DTL Series Supermicro Motherboard X8DTN+ Series Supermicro Motherboard X8DTT Series Supermicro Motherboard X8DTU Series Supermicro Motherboard X8OBN Series |
Other versions of this model
Yes, the 240-pin DDR3 form factor matches the registered DIMM slots on the listed Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN series boards.
Populate identical modules in matching channel pairs as shown in the motherboard manual; the common mistake is mixing registered and unbuffered DIMMs or placing them in mismatched slots.
Monitor the system event log or IPMI for rising correctable error counts on a specific DIMM; sustained increases indicate that module should be swapped out.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?