We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 ECC registered DIMMs, 240-pin, no heat spreaders

OWC

OWC 32GB (2x16GB) DDR3 1600 CL11 ECC Registered RDIMM SuperServer 1027GR memory upgrade

SKU CH-CPFF-7F8Y9

32 GB dual-channel DDR3-1600 ECC registered kit validated for Supermicro SuperServer 1027GR

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • CAS latencyCL11
  • Rated voltage1.5 V
  • Buffer typeRegistered
  • Memory rank2Rx4

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (2 × 16 GB) doubles capacity for virtualization and databases
  • DDR3 1600 CL11 matches SuperServer 1027GR specifications
  • 240-pin RDIMM form factor installs directly into registered DIMM slots
  • 5 V operation meets JEDEC standard for DDR3 registered modules

System-Specific DDR3 ECC RDIMM Kit

This OWC kit provides 32GB of DDR3 1600 memory as two 16GB registered DIMMs. It is built for Supermicro SuperServer 1027GR systems that require ECC registered modules. The 240-pin form factor and 1.5V operation match the server platform specifications.

Replaces Supermicro MEMDR316 Modules

The kit directly replaces Supermicro part numbers MEMDR316LHL01ER16 and MEMDR316LSL01ER16. The upgrade is worth it when the existing configuration uses smaller registered DIMMs and the workload demands more capacity within the same 1600 CL11 timing envelope.

Suits 1027GR Servers Needing Registered ECC

This memory suits administrators expanding a SuperServer 1027GR with registered ECC modules. It is not for desktop PCs or workstations that accept only unbuffered DIMMs, nor for systems that require a different voltage, pin count, or memory generation than DDR3 240-pin 1.5V.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $97.99
Cheaper than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $3.06 per GB
Cheaper than about 89% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1R6D32R4032P
Total capacity32 GB (2 × 16 GB)
Product type240-Pin DDR3 ECC RDIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Memory
CAS latencyCL11
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsSupermicro SuperServer 1027GR Series

Other versions of this model

4 more in the same range

Questions about this item

Will the 240-pin DDR3 RDIMM modules fit the SuperServer 1027GR memory slots?

Yes, these are 240-pin DDR3 registered DIMMs built for the Supermicro SuperServer 1027GR series and match the required form factor exactly.

What is the correct order to populate the two 16GB modules during installation?

Install the first module in the slot designated for channel A, then the second in the matching channel B slot so the registered signal timing stays balanced.

When should the ECC registered RDIMMs be replaced in a 1027GR running continuous workloads?

Replace them if the system logs show corrected ECC errors climbing steadily, or after the rated lifetime hours for DDR3 1600 registered modules are reached.

More in Model-Specific Memory Upgrades

Similar items