OWC 16GB (2x8GB) DDR3L 1600 CL11 1.35V ECC Registered RDIMM Kit
- 16 GB (2 × 8 GB)
- DDR3L 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB dual-channel DDR3L 1600 ECC registered RDIMM kit for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7 and WS460c Gen8 servers
Capacity 32GB (2 x 16GB)
This 32 GB kit contains two 16 GB DDR3L 1600 registered DIMMs built for HP ProLiant SL2500, SL250s Gen8, SL270s Gen8, SL4545 G7 and WS460c Gen8 servers. It is designed for workloads that require error-correcting, registered memory in a 240-pin form factor. The modules operate at 1.35 V with a CAS latency of CL11.
Each module uses a 240-pin DDR3L interface with 2Rx4 organisation and no heat spreader, matching the mechanical and electrical layout expected by the listed ProLiant platforms. Registered buffering and ECC support are mandatory for these systems; the kit cannot be mixed with unbuffered memory and will not work in standard desktop motherboards.
The PC3L-12800 speed rating caps bandwidth at the DDR3L 1600 specification, so newer memory controllers that run faster cannot be used with these modules. Capacity is limited to the 32 GB provided by the two DIMMs, and the registered protocol prevents installation in consumer platforms that only accept unbuffered memory.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R6T32R4032P |
| Total capacity | 32 GB (2 × 16 GB) |
| Product type | 240-Pin DDR3L ECC RDIMM |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Compatibility | |
| Compatible systems | HP ProLiant SL2500 HP ProLiant SL250s Gen8 HP ProLiant SL270s Gen8 HP ProLiant SL4545 G7 HP ProLiant WS460c Gen8 |
Other versions of this model
The DDR3L 1600 PC3L-12800 standard is rated for 12800 MB/s peak transfer rate per module.
Yes, the 240-pin form factor matches the memory slots in the HP ProLiant SL250s Gen8 and the other listed ProLiant models.
Install one module per channel in matching slots; do not mix these registered DIMMs with unbuffered memory.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?