OWC 32GB (4x8GB) DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM Memory Upgrade Kit
- 32 GB (4 × 8 GB)
- DDR3 1333
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32 GB DDR3-1333 ECC registered RDIMM kit for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 series servers
Capacity 32GB (4 x 8GB)
This OWC kit provides 32 GB of DDR3 1333 memory across four 8 GB registered DIMMs. It is built for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 series motherboards. The modules run at 1.5 V with CL9 latency and include ECC error correction. Each stick is a 240-pin 2Rx4 RDIMM without a heat spreader.
This memory fits workstations, servers, NAS units and routers that require DDR3 ECC registered DIMMs. It will not work in standard desktop PCs that use unbuffered non-ECC modules. Mixing these registered sticks with unbuffered memory is not supported. Buyers whose systems need unbuffered DDR3 or a different pin count must choose another product.
The decisive specification is the combination of DDR3 1333 speed, CL9 timing, 1.5 V operation, ECC and registered buffering in a 240-pin 2Rx4 form factor. Only motherboards qualified for this exact registered ECC profile will recognise and use the kit correctly.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R3D32R4032S |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 240-Pin DDR3 ECC RDIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Supermicro Motherboard X8DA6 Series Supermicro Motherboard X8DAE Series Supermicro Motherboard X8DAH+ Series Supermicro Motherboard X8DAL Series Supermicro Motherboard X8DT3 Series |
Other versions of this model
This kit is validated for Supermicro X8DA6, X8DAE, X8DAH+, X8DAL and X8DT3 series motherboards.
No, registered ECC memory cannot be mixed with unbuffered modules; all slots must use registered DIMMs.
Check the BIOS memory information or a tool such as CPU-Z to verify DDR3-1333 frequency, CL9 timings and 1.5 V voltage.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?