OWC 3R2D42R432GB 32GB DDR4 3200 CL22 ECC Registered RDIMM memory upgrade
- 32 GB
- DDR4 3200
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds 32 GB of DDR4 2933 MHz ECC registered memory to compatible Lenovo ThinkAgile servers
Capacity 32GB
This 32GB DDR4 2933MHz ECC Registered RDIMM is built for Lenovo ThinkAgile HX3520-G, HX3521-G, HX5520, HX5521 and HX7520 systems running Xeon SP Gen 2 processors. The module delivers 32GB capacity at PC4-23400 speed with CL21 latency and 1.2V operation. It replaces Lenovo part numbers 01AG632, 4ZC7A08709 and 4ZC7A08742 for direct compatibility.
Registered ECC modules run at standard 1.2V DDR4 voltage without a heat spreader, relying on server chassis airflow for cooling. Power consumption scales with the 2Rx4 rank configuration and 2933MHz data rate under typical workloads. Acoustic output is determined by the host system fans rather than the memory itself.
This module upgrades from 2133MHz, 2400MHz or 2666MHz DDR4 Registered ECC memory in the listed ThinkAgile platforms. It cannot be mixed with unbuffered DIMMs and will not work in standard desktop computers or consumer motherboards. Buyers needing higher per-slot density or different form factors must look elsewhere.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2R9D42R432 GB |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
Other versions of this model
Power down the server, open the chassis, align the module key with the slot notch, press firmly until both ejector clips click, then verify in BIOS that ECC registered mode is active — the step often missed is confirming the registered setting after boot.
No routine maintenance is required; the module has no heat spreader or moving parts. Replace only if memory diagnostics report correctable ECC errors rising above threshold or a DIMM fails POST.
The CAS latency of CL21 at 2933MHz sets the timing ceiling; under sustained load the memory controller will throttle to 2666MHz or 2400MHz before thermal limits are reached.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?